Silicone Nozzles User Report

I just ordered a min B will be here next week need a report on it what can I expect I order semisoft I hope some one has used one

FannyA:

I got a Mini B about 6 months ago & love it! It's so soft, smooth, & squishy, (but I don't remember the softness level that I ordered it in.) It's a bit big for me, so it's not my first nozzle of a session, but once I get relaxed it's very comfortable. Best of luck with yours.

Fanny ass and Just Al,

What is the product number or other name for the mini B from Silicone nozzles? When I do a search now, it excludes the term "B" from the search words and doesn't find it. Thanks,

Eric

Eric, you'll find it on the page titled "Specialty Nozzles". It's near the bottom of the page.

Happy hunting!

Deb

Thanks I hope it will be a lot of fun for me first time to use a larger nozzle of this type

Eric:

Here's a direct link:

http://siliconenozzles.com/product.sc?productId=364&categoryId=3

I just recived my mimi b today I need some advice I have been takin enemas since I was a kid I am in my 70s now I have had several nozzles in me but nothing as big as this mini b first bluge is 1 12 in question if I can get this thing in me is there an ytrouble of getting it out I probley wont get to try it before Monday thanks

Lubricate extremely well, you and the nozzle, don't be stingy. If you can get it in, you will get it out. Go slow.

Fanny, as Funn stated, just be liberal with the lube on the nozzle and also around your anus and just inside, too. Just try to relax and do a little deep breathing. You'll love it when it slips inside!

Deb

Hi Fanny... nice choice... hope the following helps!

When I ordered my Mini-B (B is for Bishop) it was a 'speciality nozzle' but might now be in a different group. This was my first nozzle from Silidyne and I also ordered the semi-soft material. In retrospect I think the next level of "firmness" might be a better choice, particularly for someone new to these products. I ran out of time on my first session and missed hooking up to my red bag. It took four more sessions over a two-month period until I mastered a dependable insertion technique. The length was perfect for me with the tip and upper 'sphere' totally engaged in the Sigmoid and well sealed there giving an enema that was confined to the colon. As the website advertises, the fill is a smooth ride and there's no rectal stimulation to trigger peristalsis or cramping.

1. My rectum is slightly longer than average and this 9.5" model just makes it to the Sigmoid. If your Sigmoid sphincter is further up it might be worthwhile to order the 12" inch Model B (however the first ball-seal is 3/8" diameter larger than it is on the Mini-B).

2. Be well cleaned out and expelled. Consider leaving salt and soda out of your pre-session cleansing solutions so that those solutions will be mostly absorbed rather than expelled when you start awakening your colon with what's to happen next. Then, plan on an entire hour for your first session with this nozzle. Remember that this session might prove to be 'dry run' if you are new to large diameter toys. I usually drink a whole quart of Gatorade during one of these heavy-breathing adventures. Make sure you have an available place to urinate.

3. Consider having both thick and thin lubes available. Have some sort of plug handy (a cheap ball point pen works). This is to plug the bore hole so that gas, lube and any prior enema won't squirt onto your towels and wipes. Start with a generous 'slathering' of Vaseline, Crisco or Albolene. Manually apply this to both sphincters, your canal and the first two inches of the nozzle. I like to also grease a long steel or glass wand and make a couple of lube passes all the way to the Sigmoid.

4. Once you get the guide tip inserted, consider easy rotation of the nozzle to advance the seal ball into your canal. A cloth or rough leather gardening glove for your dominant hand will help maintain a firm grip to rotate the nozzle as you advance it. Latex or Nitrile gloves will be worthless unless they have a heavy texture--think something a car mechanic might wear.

5. The next step is clearing the inner sphincter with the guide tip and the first ball seal. Again, slight advances with slighter retractions and rotations should do the trick. My inner sphincter will usually admit the ball seal when tickled gently by the guide tip during meditative breathing. Outright arm force or grunting leads to a spasm and a 'brick wall' to guard my rectum and it's contents. Rotating the nozzle along with a slight retraction brings the guide tip into play and that tickles the inner sphincter which then paves the way for another advance.

6. Once you've advanced the ball seal into the rectum it's a good time to pull out, add some lube to the nozzle, breathe and RELAX. Your second insertion will be easy and if you are male, will deliver a pleasure reward as the ball seal displaces your prostate then glides past your Seminal Vesicles. Move onward and be alert for a challenging turn as you approach the Sigmoid sphincter. Again go slowly and switch to breathing and relaxation should you encounter pain. If you're set up to lube via the nozzle bore this might be a good time to give that a try however too much lube at this point can spoil the seal the nozzle ball makes as it engages the Sigmoid.

7. Occasionally the guide tip will fold over, trigger a spasm and stop all progress. A 1/4" retraction, combined with 180 degrees of rotation will usually let the tip spring back to it's normal position and you can advance further. Clearing the ball seal into the Sigmoid scores you a home-run and the opportunity to experience the most cramp-free and complete irrigation your colon has ever had.

8. Extraction isn't exactly the reverse of insertion--go slowly, remember to breathe, relax and use rotation as each ball and ridge clears a sphincter. Males should pause for some oscillatory fun as each major ridge approaches and passes ones prostate. There are some surprises designed into the Mini-B. The ridges and balls are spaced so that you will be forced to split your attention between two different challenges at the same time. The balance between discomfort and pleasure is well executed.

9. I've not tried injecting lube through the nozzle bore during insertion but a handy red bag filled with thick soap and a hand pump might be worthwhile.

After reading Debgirls report on the nozzles, I decided to order one. I ordered the Concave SPD 1.5" retention nozzle in a 18 hardness. It arrived and I used it this morning doing several enemas. I love it. I had a little trouble getting it in the first time, but once I figured out how far it goes in, it was great. I was able to take the entire 2 quart enema with no pauses and no leakage. I love the feel of it. I will definitely be ordering some more and I have my eye on that model B.

I really want to buy one of these, but i am not sure which one to go for. I want to be able to reach the very end of my colon. does anybody know how to find out how long that is?

Alex, the length of the colon tubes (if that is what you are considering) is part of specs you choose when ordering a specific nozzle. For example check out this one:

http://siliconenozzles.com/product.sc?productId=228&categoryId=7

You can customize quite a bit with all the choices you get with each nozzle.

And if you have any questions, contact them directly. When I ordered my nozzle, I had a question about the bore size and got a quick answer from the owner. I think you will find they have excellent customer service and answer all your questions.

ProV1, yes, they do have quite a selection, but I was wondering how to find out the length of my colon, so that I could order a tube just the right size, and not overpay for the length I will not use. I don't imagine it would be 5 feet, but they do have that option. Which one do you use? how is that one for length?

My Silicon Nozzle tube (see the pic on profile page) can be inserted up to about 26 inches which leaves the last bulb sticking out of your ass for safety. But I have never gotten it that far. Probably about 20 inches penetration for this colon tube has been the max. I have a 30fr tube (also on my profile page), which is my smallest diameter tube and it is 30 long and I have on many occasions gotten that inserted to its full length. My third tube is about a 48fr tube and it is about 48 inches long but I have never gotten that past 12 to 14 inches in depth.

So what your body will take with any given tube varies. If you want and can get a tube all the way to the end of your colon then you probably want something that is in the neighborhood of 36 inches or possibly longer. For me just getting 20 inches deep with my Silicon Nozzle tube was quite an experience. And when my small tube goes all the way in, I really don't feel it once it gets past my sigmoid bend.

I hope this helps. Be careful with whatever tube you get and never force it.

I should have answered your primary question- is there any way to determine how long your colon is?

This is a medical question and I am guessing if you have ever had a colonoscopy, the doctor who performed the procedure might be able to answer the question. Other members here on zity with medical backgrounds may have some additional insights as to how to get an accurate measurement length of your colon.

My main point was, you may get the perfect length tube but not be able to get it fully inserted- it is very much an exercise of patience and knowing when to quit when the tube is not advancing.

Have fun and play safe.

ProV1, thank you. I have experimented with other colon tubes and I know that they don't always want to go in as easily as one could wish for. I just want to have that option, should I succeed. I primarily want it to get the M&M solution far into the colon so that it wouldn't irritate the rectum immediately.

Well, it finally happened!

Last night we both came home tired after a long day at work. My schedule had been so crazy over the past several days, a slight case of irregularity had set in. So, it was time for a date with the enema bag. I told hubby I was heading upstairs to take an enema and relax...and offered for him to join me. Surprisingly, he did!

As I gathered my enema bag and nozzles, and prepared the solution, he picked up my kegal nozzle and eyed it closely. He suggested I start with that one (which I always do). As I got into position, he said, "let me help you". He lovingly gave me a wonderful anal massage as he applied the lube and pushed a little just inside me. Then began the insertion...which felt delightful as I just lay there as the nozzle invaded me. Once the flow began, his hand found its way to my tummy and elsewhere and I moaned with the pleasure those touches provided.

All in all, the initial enema was wonderfully pleasant and produced good results which immediately made me feel better!

After the last of the enema was expelled, I devilishly asked him if he'd like to use the big Model "B" on me. His reply was simply..."if you're game"! And I was!!!

He was as gentle as a lamb as he inserted that big silicone nozzle. The fact he was doing it allowed me to concentrate on the sensations as that black slippery silicone made its way into my rectum. As we passed the three rings on the shaft of the nozzle, he gently reached around and rubbed my tummy as he continued the moderate pressure on the nozzle. My anus began to dilate once more as the last retaining ball made its entrance and my greedy bottom swallowed it quickly. By now, I was holding nearly 3 quarts of enema solution as well as the entire length of the Model "B". The tummy rub had found its way south and I was in the throes of one of the most intense orgasms I have ever had in my life. As the waves of delight began to lessen and I could actually breathe again, he stopped the flow. And placing his hands on my tummy could feel the nozzle near my belly button. Then gently, he removed the nozzle and I retreated to the toilet to expel what had been a remarkable enema.

And, yes, he got rewarded handsomely for his deft touch with my new silicone toys!

Perhaps, we've crossed the divide and I have a partner in my enema adventures!

Have fun and play safe!

Deb

Deb,

I'm so happy for you! I bet you can't wait for the next time you're slightly irregular... sounds like your hubby can't either ;-)

Your writing style always puts the reader right there, with "just right" descriptions to something we all share; thank you!

Serg

It was a wonderful experience and now that hubby has seen how much enjoyment we both get, perhaps it will happen again.

There's always hope!

Deb

Just finished a wonderfull enema using the 3inch silicone nozzel. there is no chance for leaks as this nozzel will seal the rectum quite nicely. I would like to give this nozzel a A+ for size and comfort.

Found siliconenozzles.com reputable

Love silicone nozzles. They really do come through, and everything I've ever ordered came right on time and was exactly as promised.

My mom's old saying that "your eyes were bigger than your stomach" came to mind, though when I ordered a CT122. My mom used to say that when I would take more food than I could eat, and I thought of that when I opened the package (having squandered well over a hundred bucks). The thing scared the hell out of me just looking at it!

I would like advice from others who may be have experience (so I don't throw away another bunch of money).

I'm thinking of the GRB75, in the 16" length, made with the 00-50 softness material. I already have a CT75, but it is much longer, and in the #10 softness. It is great, but I haven't been able to use more than about 8" of it, due to the stiffness. I know the 00-50 material is super soft - maybe even squishy - so I believe the 16" version, in that softness would be easily inserted.

Advice/experience with the GRB75??

38" is the most I have been able to get into me and I do not care to get any deeper. My Squarepeg Depth probe with a 1.25 inch head and 1" shaft is about all I can take and really do not care for anything larger. I have been able to insert it completely including the base and left it in me all night (about 6 hours). Be careful of how long and large you get your silicone nozzle colon tube. It takes a lot of bends and depending on the size that could be a challenge. You do not want to rupture anything.I am hoping Siliconenozzles will make a colon tube with a head on it like the squarepeg depth probe. The slightly larger head allows it to stay in you more easily instead of sliding out with the tapered ends. Love the products from both companies.

Big Bagger,

I would say if you can handle the girth of the CT-75, then a 16" version of the GRB-75 would be just the ticket for an enjoyable fill without the ultra deep insertion. As for me, I've enjoyed colon tubes for many years, but I have come to really enjoy the shorter nozzles because of their ease of insertion and the stimulation. After all, the nerve endings are really in the anus and rectum...and stimulating them is where the real "joy" comes from!

As for softness, I've always been one that loved softer toys. And while they may be harder to insert, especially playing solo, they are hard to beat insofar as comfort is concerned!

Have fun and play safe.

Deb

Debgurl,

As a result of your wonderful posts, I ordered both a Model B and a Mini B yesterday. I can't wait for them to arrive and try them. About a month ago I ordered one of their retention nozzles and it is the best I have ever used except for a double balloon.

Debgurl

The CT75 I currently own is fantastic, but a little too stiff. The girth is okay, but it just doesn't make the first turn in the 10 softness.

I think the 16" (maybe even the 14" or 12") 00-50 would be close to ideal.

Thanks!!

Buttshot,

Let us know how you like the Model B and the Mini B! Can't wait to hear what you think about them.

Big Bagger,

I like my 12 inch length Model F. It gets into the sigmoid and delivers a very comfortable enema. I only wish the retaining ball was a little bigger so it would stay inside me better.

Have fun and play safe, guys!

Deb

Debgurl,

Both nozzles arrived today, the Model B and the Mini B. My reaction when I saw them was basically the same as your husbands, "I can't believe I will be able to get either of those in my butt."

I won't have the opportunity to do any enemas until tomorrow night, but I am going to try. I will start with the Concave Retention nozzle that I bought from Silicone Nozzles, and at some point, after 1 or 2 enemas, I will try Mini B. Depending on how that goes, I will get to the Model B. But I guess I didn't really read the dimensions very closely because these things are huge.

Hopefully I will get lots of pleasure from them.

Love Silicone Nozzles ! I have the PSP I think it is, in flo green 00-05. It's a lotta' fun going in but hurt too much to hold for a period of time, so today I ordered the "Edison" in regular translucent. Their shipping is pretty quick, and I'm sure I'll be wanting something else fun soon ! ; )