Silicone Nozzles User Report

I just purchased a couple of nozzles from Silicone Nozzles and I wanted to share my experiences.

First, the service is fast and the nozzles arrive in a nondescript package. The quality is really top notch and I am impressed with how smooth the nozzles are...no rough seams or any such thing. Only nice smooth silicone just waiting to go to work! And that's exactly what I did this morning!

Enema number one started out with the Kegal style nozzle (KGL1)

http://siliconenozzles.com/product.sc?productId=273&categoryId=42

I got my nozzle in black silicone (it looks extra naughty in that color) in the semi soft silicone. I oftentimes lube around my anus with a nice moisturizer in addition to my KY Jelly when using silicone toys to keep them from getting sticky. I followed this practice today and it really helped the nozzles slide in effortlessly. The KGL1 felt amazing as it slid into my rectum. There was enough dilation to make it exciting, but not so much it was painful at all. Once the largest hump was securely in, I advanced the nozzle all the way to the retaining flange. The feeling was so awesome, I just lay there and savored the moment enjoying the invasion of my rectum. Then, I started the flow and after a few minutes the resulting fullness caused me to bear down on the nozzle which only heightened the sensations. After stopping the flow, I continued to bear down on the nozzle as waves of "hurts so good" cramps coursed through my tummy. Finally, it was time to release the pent up enema. As the curves of the nozzle slid from my rectum, my toes curled and the hair on the back of my neck stood at attention. Suffice it to say, it was wonderful!

Enema number two was to be with the Model F colon nozzle

http://siliconenozzles.com/product.sc?productId=59&categoryId=39

I purchased this nozzle in the 12 inch length, again, in the semi soft silicone...translucent in color. I again lubed up as I had for the initial enema and started the insertion. The balls on the end of the nozzle are deliciously stimulating. In fact, I just played with them going in and out several times before I began to advance the tube further into me. All that did was make me want to take all of the tube even more. I advanced the tube with minimal pressure as it entered smoothly. Then came the retaining ball. As my anus opened to accept the girth of the ball, I could feel the tube slip around my sigmoid flexure....a goose bump inducing feeling! Once the tube was in place, I settled into my "nest" and enjoyed the sensations as the fullness in my tummy increased from getting a nice high enema. Since I used a saline solution, I enjoyed an extended retention period which was aided by the retaining ball on the end of the nozzle. That freed my hands to enjoy other pleasures!!!

These will not be my last silicone nozzles! I'm really excited to think about the possibilities of acquiring one of their nozzles that would really challenge me. I will admit, I started out conservatively in regards to length and girth...but they are nonetheless really fine nozzles that have taken my enjoyment of enemas to another level.

So, there you have it....a user report on my initial foray into the world of silicone enema gear.

Have fun and play safe!!

Deb

Excellent review Debgirl! Those nozzles certainly do look stimulating. What bore did you use?

I got the 1/4 inch bore and purchased the connector kit which gave me the connection I needed. The 1/4 inch bore produces a nice stream of water that fills me at a perfect rate.

Deb

I have the same experience with silicone nozzle. Great products, good service and plenty of fun times.

Loved the long 12" silicone nozzle debgurl, think I might buy one.

Maybe we could get silicone nozzles to start making jbl bags, since our original source is now gone. I have one and love it, but it has sprung a leak. Would sure like to get another one in good shape.

Kid, they have some very great and reliable products, and good quality. You won't be disappointed. And delivery is very reasonable.

MAYBE WE COULD GET SILICONE NOZZLES TO START MAKING jbl BAGS, since our original source is now gone. I have one and love it, but it has sprung a leak. Would sure like to get another one in good shape.

I know Silicone Nozzles will accept suggestions, so you could always try them. However, they specialise in silicone and wouldn’t be set up for latex. And a silicone JBL bag would be a quite different product to the traditional one!

Let's just say...using my new silicone nozzles was even sweeter the second time around!

I started today's fun with a slightly soapy solution delivered with the Kegal nozzle. I hung the bag low so the solution would flow in at a very slow pace since I was wanting a nice cleansing enema. There was no rushing this enema! The 1/4 inch bore of the nozzle and with the bag about 24 inches above my rectum it made for a wonderful sensual infusion of solution as I enjoyed the fullness of the nozzle in my bottom!

My rinse enema consisted of a saline solution injected with the Model F nozzle inserted about 12 inches into my colon. As the last retention ball slid into my rectum, goosebumps reappeared as the warm solution was deposited into my sigmoid colon in a gentle, if almost imperceptible manner. As I lay there, I thrilled at the fullness of the retaining ball in my rectum and growing pressure in my colon as the last of four quarts of enema solution flowed into me.

All in all, it was another sensuous adventure into the world enema bliss.

Have fun and play safe!

Deb

Deb, you write sooooo well! A wonderful mix of real world experience along with a sensual overlay that makes for really great reading. We have ordered a selection of toys from them. Will keep you all posted.

Deb, your posts about your enemas are so descriptive, would love to be a fly on the wall watching your technique. Would probably teach me how to use a colon tube properly and safe. Keep up the good posts.

Mike 🌹

I have a 60: large diameter silicone nozzle. It was too much and stiff for me to be successful in full insertion. I wish they had smaller sizes before they get down to 36fr. Maybe a 38-42 would work better. Does anyone have the 36fr colon tube in 48" or 60" and if yes, do you get it soft or firm and how does it work?

Debgurl, Thanks for the wonderfully written report! Your posts are always a delight to read.

Thank you for wonderful "report" I have to look into the Silicone nozzles. I just bought a Cleanstream 10 inch nozzle with bag adapter but haven't been able to get it past my sigmoid flexure yet. I think it's probably to stiff.

Debgurl, what stiffness did you get? I ordered two nozzles from them. The craftsmanship was good but way too soft for easy insertion. My bad. Any guidance you or anyone has is appreciated.

I ordered both of my nozzles in the "semi soft" silicone. Having no idea of the softness scale, it was really a shot in the dark. I think for a pure nozzle (such as the KGL1) I'll probably go a little firmer next time, however, for anything that gets inserted higher, I'll probably stick with the semi soft.

Hope that's helpful!

Deb

Debgirl, thanks for the advice, Ordered below the following:

KGL-1 - UNIQUE TEARDROP TWIN BALL SILICONE ENEMA NOZZLE

Item #: -KGL-1-Black-30-1_4th

Color: Black

Firmness / Softness Selection: 30 Firm

Bore Diameter: 1/4 Inch

Thank you so much for sharing.

Funn, let us know how you like the nozzle in the firm silicone. I may order another one in a firmer silicone without a bore just to have as a toy.

Good luck and keep us posted.

Deb

I got a Silicone Nozzle maybe about a year ago (see the pic on my profile page) and it has been quite the nozzle. If you are into enemas and anal eroticism you must treat yourself to one of their nozzles. The workmanship and service are top notch. And considering how many options you get for each nozzle, you can customize quite a bit. The prices may seem kind of high at first glance but you will not find anything like these nozzles anywhere else and they will likely last a lifetime.

I use my Silicone Nozzle when I have the time to relax and take my time to work it in as far as I can go. So far I have gotten about two thirds of the 28 inches of length in so far. Debgurl is right, the feelings you feel are like no other enema or anal toy for that matter.

So if you are thinking about getting one, treat yourself.

I have a pink silicone dildo made by them that has been very naughty.

I would recommend them.

You folks have just about gotten me convinced to buy one of the tools from Silicone Nozzles. Now I just have to come up with the money.

You folks have just about gotten me convinced to buy one of the tools from Silicone Nozzles. Now I just have to come up with the money.

You won't regret it! Highly recommended.

I have a CT 75 from silicone nozzles and like it. It is hard for me to handle solo as I can not get the last retaining knob in as it is 2in. Maybe an enemate would help. I'm from Des Moines.

OK guys, this will be my last user report for a while! I'm traveling on business the rest of this week and holiday guests start arriving next week (can it be here already?).

This morning I took some time to enjoy a couple of leisurely enemas using my new nozzles. And as I lay there savoring the exquisite sensations of each one in my bottom, I thought about all of the enema toys I've had over the years. Yes, there were countless colon tubes of various sizes and lengths; several double balloon nozzles of differing sizes and material and of course, the obligatory butt plug nozzle. But I must say, these two new nozzles are so nice and provide such a wonderful addition to my enjoyment of enemas that I only marvel at what took me so long to buy them!

There is no balloon to burst...no colon tube to kink...only enjoyment.

So, it might not be a cheap stocking stuffer...but ol' Santa could do far worse!

Happy holidays and Merry Christmas!

Deb

I own a number of their nozzles and all but one so far have lived up to what I expected.

I had wanted a colon tube for a while so I looked around and found the longer "bat" style one. http://siliconenozzles.com/product.sc?productId=92&categoryId=39 My review is on there also.

I also wanted a larger diameter one in soft silicone so after much deliberation, I got his one: http://siliconenozzles.com/product.sc?productId=195&categoryId=3

These two worked quite well but I felt a need for a retention one and since I disliked the double balloon style one, I looked here instead.

I got the 2" and 2 1/2" versions of this plug in different softnesses http://siliconenozzles.com/product.sc?productId=409&categoryId=32#?showReviews=true

I now have two nozzles and a plug from them. I have enjoyed them all. Good company!

Just to add a bit to this thread, I have really enjoyed my new toys from Silicone Nozzles. This morning, I indulged in a series of enemas (warm water and baking soda) using my new nozzles and experimenting with them as the series progressed.

I have found that the Kegal nozzle (KGL1) feels its very best when inserted just over the big hump. It provides a wonderfully full sensation in the rectum while injecting the solution into the base of the sigmoid. To just lay there as the enema does its work and squeeze and release on the nozzle using my anal muscles is simply thrilling. One other thing I have learned is that the nozzles get really slick when they get wet (from whatever source). That adds an extra dimension of naughtiness for me!

As for the Model F nozzle, feeling its length glide up into my colon only makes me want a longer length tube. While I held an enema delivered with this nozzle, I began playing with it and thrusting it in and out of my bottom...from the little balls on the end to the bigger retention ball. It forced waves of pleasure all through my colon while it was distended by enema solution. When the sensations almost took me "over the top", I just inserted the retention ball and rode out the feelings as my anal muscles firmly gripped the nozzle .

It's as though I experience something new each time I use them. And I must say, they have brought back a sense of adventure to my enjoyment of enemas.

Have fun and play safe!

Deb

I can't seem to find the KGL1. Is it still available? Do you know if it was replaced by the KGL4?

I can't seem to find the KGL1. Is it still available? Do you know if it was replaced by the KGL4?

Here's the link for the KGL-1. It's a nice nozzle for those of us who aren't into the uber-size game!

http://siliconenozzles.com/product.sc?productId=273&categoryId=42

Have fun!

Deb

I was wanting to get a quality double balloon cath from Klystra but with them gone, ordering a comfortable retention nozzle from SiliconeNozzles has definitely moved onto to my short list. The problem is, there's too darned many shapes and options to choose from!

I was wanting to get a quality double balloon cath from Klystra but with them gone, ordering a comfortable retention nozzle from SiliconeNozzles has definitely moved onto to my short list. The problem is, there's too darned many shapes and options to choose from!

I know what you mean. It's hard to make a decision what nozzle to buy first. But I can tell you, start with a size you know you can handle and go from there. That's what I did and I have thoroughly enjoyed every minute of my enema time. I certainly intend to add to my collection, but being grounded in realistic expectations is the way I roll!

Have fun and go for it!

Deb