Silicone Nozzles User Report

It arrived this afternoon. OMG, it's big. The "stretch" working the tip up through the rectum towards the sigmoid is pretty impressive, definitely on the order of my 122 fr tube when I get both retention balls in. Couldn't insert it all the way the first time and really didn't have the time to work with it much. I did not have a hose attached (so I could try to sit on it and have it slip in). Butt, definitely not something to be rushed.

More later.

An update:

So, with a little time to see if I could insert this nice new enema plug, I lubed up and began the process of inserting this plug without any hose attached. It was a study in pain and pleasure (like it hurts so good).

This enema retention nozzle is actually larger than advertised. The first section is 1.75 inches long (instead of 1.5 inches, but SN's measurement may be beyond the rounded nose of the nozzle) and is 2.0 inches diameter (not the 1.8 inches in diameter advertised). This is much larger than the 122fr tubes I own (1.6 inches diameter). My perception is that this tip section is the first challenge that as it expands towards the sigmoid with resistance from the muscle structure of the upper rectum (i.e., the valves of Houston).

The second section expands to 2.5 inches in diameter and this is definitely larger than the retaining balls of the 122fr tube (which max out at 2.25 inches diameter and they took me awhile to get inserted into the upper rectum). This section is about 2.75 inches long before it tapers slightly with a 0.67 inch section of 2.25 inches in diameter. At this point, the tube is inserted 5.25 inches in and although there is some resistance at this point, I can achieve this insertion fairly easily. The next section is a full 3 inches in diameter and 3.75 inches long.

The challenge is not passing the 3 inch diameter retention ball section through the inner and outer anal sphincters (though it does give the pleasure aspect as it passes the inner anal sphincter and begins to close down on the retention portion of the nozzle). The retention ball is quite filling in the rectum. No, the challenge is the expansion of the upper rectum and entry to the sigmoid with the 2.0 and 2.5 inch sections of the nozzle and maybe even a portion of the 3 inch retention ball. So, as the well-lubed front end of the nozzle gradually pressed forward through the use of my body weight, I could feel the resistance gradually lessening as the last half inch on the retention ball slid in to allow the retention valley and the flange to be pulled up against my ass.

Ass I said...pain and pleasure. I came almost immediately. I wanted to hold the nozzle in for a while, but the pressure was very intense (not painful, per se). So, I gradually pulled the nozzle out to relieve the pressure. I look forward to reinserting it sometime in the near future and connecting the enema bag to provide a well-sealed enema.

The nozzle I selected is the #12 softness, so it does compress and bend somewhat. A softer nozzle would probably compress more. However, it would also bend more at the final retention valley and flange than this one does. I don't know whether that would help or hinder insertion.

Additional edit---

One more thing. After removing this retention nozzle, I think I can relate to what my ex-wife told me after we did anal sex: "I can tell I had something really big in my ass." Not painful or sore. Just that I had something very large stuck in there.

As one of the lucky ones with a "large" selection of S/N products, a few ideas for versatility.

ALWAYS order plugs/nozzles with a bore rather than solid. Bob will hate me for these tips. Sorry Bob..

When ordering a large toy (or smaller gauge), get at LEAST 2x sets of quick detachable connectors (QD) AND some silicone tubing.

When setting up the Toy, instead of inserting the connector into base of toy, insert approx. 6 inches length of tube. (only needs to go in approx. 1 inch to be retained)

The silicone/silicone will bond together (not permanent). Add on QD to end of tube.

Get some closed cell foam (camping mat) and cut a wedge plug and insert this into matching male/female Q/D. Attach.

This will allow you to use it as a PLUG without damaging the Barbs in base of toy when sitting on it and rocking. (joy joy)

If you want to keep the top tube of Head end clean, just insert a wedge of closed cell foam which can be easily squeezed out by hand to remove when required as Enema nozzle.

This will give you a sealed unit, that can be turned into a Enema tube by attaching to end of bag with the extra Q/D you purchased. (never enough of these).

By setting your expensive toys this way, it enables them to easily and quickly converted from Butt plug- Dildo- Nozzle - Enema tube,

That will put a smile on your dial..

Brilliant, even if I say so myself !

A.K.A. Pee Wee Pete.

Having found myself with an hour on my hands this morning, July 26, 2017, and an itch that needed to be scratched, I spoiled myself with 3 enema buckets filled to the 3 quart line with warm, minty water administered to my colon by my, seldom used, SN DBLBL-3XL nozzle. You can find a picture of this beast in my albums. https://www.zity.biz/index.php?mx=profile;ox=memalbumshow;u=90505;ax=7125. It's the pink/grey/blue one.

The nozzle itself is 11.5 inches total in length with approximately 10.5 of those insertable. The tip end comprises a 2.5 inch diameter bulb. The shaft is 2.0 inches in diameter and about 5.0 inches long before the 2.5 inch diameter retaining bulb and then a narrower retaining valley. The length places the tip end through the junction between the rectum and sigmoid and seats itself deliciously in the lower part of the sigmoid. It does so with a truly sublime stretch. I use this nozzle only infrequently because that stretch through the rectum/sigmoid junction certainly takes some getting used to. Today I wanted an experience more fulfilling than my standard issue session where I'll use my SN Model B. The DBLBL certainly delivered. And how!

The anticipation itself as I slid the bulbous tip into my arse for the first bucketful had me leaking pre-cum which was added to simply by the pressure exerted on my prostate by the bulb. I never insert the whole length of my more significant nozzles for the initial clean out, and that was the case this morning. Content to empty the bucket from the rectum upwards, I drained the 3 quarts and then simply lay, on my back, enjoying the wonderful sensations of the minty water gurgling in my guts and the bulb pressuring my prostate. Ordinarily I don't bother holding my enemas. Today was an exception as I let the waves of euphoria lap over me for 10 minutes or so before expelling.

Removing the tip bulb to expel resulted in a lovely dollop of cum being expressed from the tip of my cock into my waiting palm as the contents of my colon started to make their way out of my arse. This prostate massage element of my enema sesssions is something I have come to treasure.

Bucketfuls 2 and 3 were delivered with the entire nozzle inserted into my welcoming arse. This nozzle isn't something that can be manhandled in to action. In my experience, some finesse is required. A generous application of coconut oil to the entirety of the nozzle made for insertions for both buckets 2 and 3 straightforward, but certainly not something I could or even wanted to rush. Rather, savor the simultaneous stretch of both the anal sphincter and sigmoid sphincter as 10+ inches of oiled up silicone founds its way to my happy place. With the nozzle situated, 3 quarts were administered at my traditional fast pace after which I, again, delighted at the sensations of being filled both by enema solution and a tool designed and crafted by whoever the god is of all things anal.

Removing the entire nozzle, having deposited the enema in to my bowels is, in and of itself, a mind-blowing experience. I teased the nozzle from myself enjoying every nerve-tingle provided from the double stretch of sphincters, the slide of the smooth shaft and the prostate pressure.

As you might imagine, I'm sat here writing this in the most perfect frame of mind.

The DBLBL-3XL is not for everyone simply because of the girth of the bulbs. Note however that SN do offer this design in less challenging sizes. I love mine and thoroughly encourage anyone so inclined to play Goldilocks and try one out whatever your desires or experience level may be.

The length places the tip end through the junction between the rectum and sigmoid and seats itself deliciously in the lower part of the sigmoid. It does so with a truly sublime stretch. I use this nozzle only infrequently because that stretch through the rectum/sigmoid junction certainly takes some getting used to.

That is a really good description of these longer, larger tipped nozzles. That stretch that deep in is a really interesting sensation. I recently realized just how much pressure/stimulation that the whole insertion/stretching/passage process has on the prostate and it is pretty exquisite.

Glad you had a great time.

I've continued to love the Rattler and chasing additional similar sensations I've just ordered the SNCMAX3 in blue, 10 soft, 5/16" bore and the DBLBL-3XL in green, 18 mildly firm, 5/16" bore. The former is intended for both the utility of deep retention pre-play clean-outs and also further stretching of my three rings. The latter is intended for the same clean-outs and ideally significant relaxing of the sigmoid opening by "popping" the tip in and out of the sphincter. I'll report back!

Still waiting on them to come out with the perfectly designed double balloon enema nozzle...

Still waiting on them to come out with the perfectly designed double balloon enema nozzle...

Yes, you and me both. I just lost mine to a rupture of the outer balloon yesterday after just 2 years of pretty minimal use. I am not a happy camper. ??

Eric

Logistics update, since I know customers like me are often interested in the current turnaround times for planning an order or gift. I placed my order on Tuesday 9/12 afternoon and received shipment confirmation a little less than 48 hours later. That slates my order for delivery on Saturday 9/16. I continue to be impressed with Bob's operations. Sure, this current order doesn't involve a segmented product that I think requires more involved curing, but there is nonetheless plenty of silicone in the thick items that I ordered.

I'm wondering if anyone has experience using a lube that includes silicone with Silicone Nozzles product. I know that silicone quality and purity makes a difference in the potential negative impacts. I like to use Boy Butter (whether the original or extreme version for some desensitization) and Pjur Back Door (for the relaxing jojoba oil). I haven't encountered problems when I've used those on Doc Johnson's American Bombshell line of giant toys. Those all have a smooth texture, which makes cleaning the lube off easier. Tantus toys have a matte finish, which has resulted in the appearance of some residue, even after cleaning with soap and water, but I can't tell if it's the oil-based or silicone-based components of the lubes.

I don't intend to use either of the lubes above for an extended session with a Silicone Nozzles piece and I plan to clean any pieces promptly. However, I don't want to take a chance if someone else has ruined a piece after using silicone lube.

One of my SN nozzles was used on me with a silicone lube. It was an accident (she picked up the wrong tube). During use there were no issues, but the subsequent cleaning revealed the mistake. During use, I noticed that there was more "drag" than is typical with a water-based lube, but nothing dramatic.

Other than a bit of surface shedding - kinda like peeling skin after a sunburn - there were no major effects. The piece is fine and there were no lasting effects.

This proves that silicone/silicone lube are a bad idea, but a one-time mistake is not problematic. Prolonged use would probably degrade the nozzle.

Gosh, all of my silicone toys are so precious that I would be too scared to ever test silicone with any of them even tho an ill effect is pretty rare.

I will say that once a bottom of mine gave a blow job to me with a strap on (a tantus toy) and was wearing sparkly super wet lipgloss per my request, and the lipgloss apparently contained silicone, and bits of glitter melted INTO the surface of the toy at the base.

Well -- at least I'll have a reminder of how far down he made it LOL.

At any rate, I mostly use jlube or crisco with all of my silicone nozzles toys... why risk one's precious toys?

Still waiting on them to come out with the perfectly designed double balloon enema nozzle...

According to the latest status update on the SN home page, they have a couple of designs in the works and are expecting autumn availability.

After reading the reports our Zities have submitted, I ordered a KGL-2 Multi ball, white translucent and #12 Semi Soft plus 12 feet of 5/16 I.D. and 1/2 inch O.D. Natural Latex tubing, all arriving sooner than expected; a nice surprise.

My "User Report". The size of the KGL is satisfactory, the Semi Soft I find a little too soft because it goes in easy and smoothly and then you just don't feel it any more. --just a little too soft. Butt the newness draws me in....it'll get a lot of use, probably every day for awhile.

I give it an 8.5 (Fun to have it in 'the collection'.) And I give the company high marks for their service and professionalism

the boxcar

I just ordered a 20" CT-122 French 1.6" Diameter Silicone Serpentine Colon Tube in 12 Semi Soft with 2.4" ball and multi-ball tip. It arrived in less than a week. I love it! It slides right in very easily and feels amazing.

The CT-122 is great to use by itself, but I found another use for it. I have a much longer, thinner, softer and floppier tube that I can't insert on some days. It's my 66” CT-75 1” Diameter Colon Tube in 10 Soft. It tends to double back and hang up in my sigmoid colon. Now my CT-122 fixes this problem every time. All I have to do is lube it generously, insert it, pull it out, and repeat two or three more times with a generous re-lube on each reinsertion. This stretches and straightens out my rectum and sigmoid colon, opens them wide, and gives them a thick, slippery coating of lube. When I then switch to my CT-75, I only need 10 seconds to slide in 30” and hit my splenic flexure. It’s a little tricky there, but soon I feel my CT-75 sliding through my transverse colon, around my heptic flexure, and down my right side.

Writing this is making me so tube-horny that I have to go do it again right now! CT-122 first, then my 66" CT-75 all in!

Writing this is making me so tube-horny that I have to go do it again right now! CT-122 first, then my 66" CT-75 all in!

I have discovered this works a fair number of times (although you still have to reasonably "clear" to push in deeply). Mine are much longer than the one you describe and can make the turn around the splenic flexure. Glad you're enjoying yours!

...I've just ordered the SNCMAX3 in blue, 10 soft, 5/16" bore and the DBLBL-3XL in green, 18 mildly firm, 5/16" ... I'll report back!

@permitdrab any update on your experience with either or both? I have a DBLBL-3XL already and just plunked down, admittedly based a lot on what I’ve read from fellow Zities, for an SNCMAX3 (12 semi soft in fluorescent yellow). I expect it to arrive within the next 2-3 days.

I have already earmarked the first weekend in November, when the family will be away, for some extensive play time.

@EnemaRunner, what softness is your CT-122 and how long is it? I had a 60-inch one in a very soft grade, 00-50 Plus Soft I think. It bunched up in my splenic flexure so tightly once that I had a very hard time pulling it out. I panicked and I stopped using it. Softness is a delicate balance. Too stiff and it can't make a sharp turn. Too soft and it can't push through because it folds back or bunches up like an accordion.

@Loveitkinky and @permadrab, I want to hear your SNCMAX3 max reports too. I love mine in 00-20 Extra Soft. It always goes right in, its both comfortable and very arousing, and I like to leave it in all day or overnight. @Enema Runner has one two in 00-15 Semi Soft I think. He likes its firm feel, but its hard to insert sometimes I think he said. I wish I was wealthy enough to try every silicone nozzles option in its products that interest me. I probably would, especially with its colon tubes to find out how wide a tube I can run the whole length of my colon.

From what I have seen on their site I think they are coming out with a double balloon nozzle in the next month or two

@EnemaRunner, what softness is your CT-122 and how long is it? I had a 60-inch one in a very soft grade, 00-50 Plus Soft I think. It bunched up in my splenic flexure so tightly once that I had a very hard time pulling it out. I panicked and I stopped using it. Softness is a delicate balance. Too stiff and it can't make a sharp turn. Too soft and it can't push through because it folds back or bunches up like an accordion.

I've got two; one at 32 inches and I think the other one is 48 inches (I don't use it as much). They are both 00-50 softness. A little tough to maneuver outside, but I generally don't have any problem making it around the splenic flexure. Getting the longer one across the transverse colon and to the hepatic flexure is the tough part for me.

@Loveitkinky and @permadrab, I want to hear your SNCMAX3 max reports too. I love mine in 00-20 Extra Soft. It always goes right in, its both comfortable and very arousing, and I like to leave it in all day or overnight. @Enema Runner has one two in 00-15 Semi Soft I think. He likes its firm feel, but its hard to insert sometimes I think he said. I wish I was wealthy enough to try every silicone nozzles option in its products that interest me. I probably would, especially with its colon tubes to find out how wide a tube I can run the whole length of my colon.

My SNCMAX3 is the the #12 softness (translucent). I wanted the translucent color. It took some work to get the full length inserted and seated on a consistent basis. The nozzle doesn't compress very much so the junction at the top of the rectum/base of the sigmoid has to expand to accommodate it. In my case, the nozzle also has to make a very slight turn "forward" towards my navel. It's not the widest portion that is hard to insert, it is the nose of the nozzle.

Now that I can get it inserted consistently, that last little push to pop it in is really something. And I am very well sealed where the nose of the nozzle is seated inside me. The secondary seal is the widest portion of the nozzle and the way it fills my rectum and the way the base pulls up against my anus when it is fully seated. It is really something to get all the way in and rock back and forth. I usually insert it without the hose attached. Once it is in and seated, I'll insert the hose fitting and open the valve. As the solution flows in and begins to expand the colon, it is interesting to feel how the nose of the nozzle moves and readjusts inside me. Leakage, however, is not an issue. Pressure can be.

From what I have seen on their site I think they are coming out with a double balloon nozzle in the next month or two

I watch with a great deal of anticipation. If they come up with a very durable (i.e., thicker walled) silicone nozzle, I'm in!

My SNCMAX3 just arrived in the mail. Resplendent in neon yellow. I can’t wait to find the time to try it out. More to follow...

My SNCMAX3 just arrived in the mail. Resplendent in neon yellow. I can’t wait to find the time to try it out. More to follow...

Have fun!

Ok, so my first impression upon unboxing my new nozzle was something along the lines of “holy shit!”. Others have remarked how, in real life, this thing really does seem so much bigger than the simple, raw dimensions describe on paper. They’re not wrong.

An extended play session will come in a couple of weeks when I have the house to myself for a weekend. Believe me when I say, this nozzle is not one to be rushed. With that said, however, I did find time yesterday to dabble a little. Wanting an enema session, just because, I availed myself of my other new nozzle (one that, after more play I will describe in detail in another post) to administer 2 wonderful 3qt buckets of lightly soaped warm water to prepare myself for what I knew was going to be only an exploratory skirmish with the behemoth SNCMAX3.

Knowing, thanks to the reports from others, as well as my own knowledge of the insides of my rear end, that Max was going to tease open the sphincter to my sigmoid in a large way, a copious smearing of coconut oil on the substantial tip was duly administered before I climbed aboard. The sensations were sublime as the tip made its way into my rectum and were heightened as the second, wider section followed. As soon as the third, and widest part of the nozzle breached my butthole, the tip made its presence at the entrance to my sigmoid entirely known. Not being a process to be rushed, I then gingerly applied the pressure and adjustment of position required to coax Max fully home. What. A. Rush. The feeling of both fullness in the rectum as well as of significant presence in the sigmoid was truly exquisite.

In my next session I’ll hook up my bucket to the nozzle to tinker with filling my colon via the awesomeness that is neon yellow. I’m sure it will take some getting used to. Frankly, if I’m never successful with it, I won’t be all that bothered as Max will do just fine as a huge plug. Albeit one with a 5/16” bore through it.

More to follow...

Ok, so my first impression upon unboxing my new nozzle was something along the lines of “holy shit!”. Others have remarked how, in real life, this thing really does seem so much bigger than the simple, raw dimensions describe on paper. They’re not wrong.

.....

Knowing, thanks to the reports from others, as well as my own knowledge of the insides of my rear end, that Max was going to tease open the sphincter to my sigmoid in a large way, a copious smearing of coconut oil on the substantial tip was duly administered before I climbed aboard. The sensations were sublime as the tip made its way into my rectum and were heightened as the second, wider section followed. As soon as the third, and widest part of the nozzle breached my butthole, the tip made its presence at the entrance to my sigmoid entirely known. Not being a process to be rushed, I then gingerly applied the pressure and adjustment of position required to coax Max fully home. What. A. Rush. The feeling of both fullness in the rectum as well as of significant presence in the sigmoid was truly exquisite.

....

More to follow...

For those with this nozzle...we know what you mean. I know the most exquisite sensations come from rocking back and forth on the nozzle while lubed up and allowing it to slip in and open the sigmoid. If you can find an L-shaped barbed fitting, you can insert one arm of the L into the nozzle and the hose on the other so that the liquid can flow in without the hose being pinched off. You can then experience something else that I rather enjoy.

Getting the nozzle almost all the way in except the last 1/2 to 3/4 of an inch (because that last "expansion" can be really intense), I know that I'm pretty well sealed on the inside. I like opening the valve and allowing the warm solution to flow in and begin filling me. The liquid fills the sigmoid and begins to expand it as well as relaxing the muscles. Usually it slides/pops the rest of the way in for a rather nice and complete filling.

As I said, have fun.

SNCMAX3! Oh what a feeling! @Loveitkinky, your description is perfect:

The feeling of both fullness in the rectum as well as of significant presence in the sigmoid was truly exquisite.

I just had to go get mine, lube up, (me and it), and slowly and carefully push it it. I'm sitting and rocking on mine now! Wow! That new kind of pleasure in my gut is back, and I'm sticky with pre-cum.

@Enema Runner, I like your idea of using a 90-degree hose bib (joiner) to let me sit on a chair wherever I like and fill up with my SNCMAX3. I'm going to try filling, rocking, and clinching simultaneously to see if it makes me cum no hands!

The seal would certainly work for filling while sitting in a chair. It must be near perfect, even for very high internal pressure. I think my colon would burst before my SNCMAX3 pops out or leaks.

WildBill2, Enema Runner and Luvitkinky (and anyone else with this nozzle), how does your SNCMAX3 compare in stretching at the anus versus a stiffer toy or plug? I guess I'm especially interested in WildBill2's because he got the softest model. Does it feel like a 3" toy, or does the squishiness make it more of a 2-1.15" toy (at the anus - I know it feels big inside)? How big of a stiffer toy do you think you need to be able to take to be successful with this nozzle in the softest grade silicone?

Do you (all of you) find that it triggers a strong urge to defecate on its own?

Lastly, if you could have only this nozzle or a SNC colon tube which would you choose? Why?

WildBill2, Enema Runner and Luvitkinky (and anyone else with this nozzle), how does your SNCMAX3 compare in stretching at the anus versus a stiffer toy or plug? I guess I'm especially interested in WildBill2's because he got the softest model. Does it feel like a 3" toy, or does the squishiness make it more of a 2-1.15" toy (at the anus - I know it feels big inside)? How big of a stiffer toy do you think you need to be able to take to be successful with this nozzle in the softest grade silicone?

Do you (all of you) find that it triggers a strong urge to defecate on its own?

Lastly, if you could have only this nozzle or a SNC colon tube which would you choose? Why?

With the #12 softness, the last 3" section does not compress very much because there is just so much silicone to compress and it will just bend ever so slightly. So, it behaves like a true 3" (I have a 2.75" glass plug that obviously does not compress or bend and I can take that pretty easily). I would probably suggest one softness level down from the #12 (Note: the #12 softness is no longer offered; it's the #18 or the #10. The #10 would be slightly softer). I can't speak to the softer levels for this nozzle.

It does not trigger a response to defecate though you do have to be relatively empty to insert it fully. For me, it is the contraction of the sigmoid/upper rectum muscles that pushes the nozzle out unless I'm able to both "stretch" and relax those muscles. I suspect if the nozzle was longer (and more flexible) those muscles could not push the nozzle out. Passing the widest portion through the anus is not the limiting issue for me. If I get the muscles to relax then the widest portion also holds the nozzle in.

Although I love the diameter of the nozzle, I think I'd like more depth than this gives. I can take the CT-122 with relatively little difficulty up to the splenic flexure and I can get the tube to turn there. But I'm intrigued by the 190 or the 225 in the 24" length.

I have both the SNCMAX3 and the SPD3.0 retention plug in 00-20 softness, (the softest Silicon Nozzles offers.) The SPD3.0 is a 3-inch cone shaped plug with a very flat bottom perfect for retention. I think it compresses maybe 20% as I push it in, and then it expands back out to almost 3 inches inside me. It nearly perfectly seals my rectum and anus. I can take a full gallon enema right off the bat with an SPD3.0 if I can endure the intense urge to let it pop out with about 1.5 quarts inside me. The SNCMAX3 in 00-20 seals even better, and filling with it is very pleasurable.

My SNCMAX3 does not trigger an urge to defecate. As Enema Runner says, you need to have your rectum and lower sigmoid colon fairly clean or you can't insert it at all. When I do insert mine, the sensations are almost orgasmic. Rather than an urge to defecate, it triggers an urge to cum! Having something of large diameter penetrate your inner sphincter and lower sigmoid really hits a new pleasure nerve. If I had to do it over, I'd probably pick the 00-50 material. In 00-20, the SNCMAX3 is pretty floppy. A little less floppiness would make it perfect for me. On the other hand, 00-20 is very comfortable. I've left it in all day or all night several times.

Would I rather have a colon tube or an SNCMAX3 if I had to choose one? As far as pleasure goes, it's like apples and oranges. I like them both, but the pleasure is entirely different. Inserting my 1"-diameter 66" colon tube all the way in doesn't make me want to cum, but it feels really good. The pleasure of a colon tube is as much a mental thing as a physical thing. The realization that you have inserted something into yourself running the entire length of your colon is mentally euphoric. If I had to choose, I'd go with the colon tube. Every time I do it, I still can't believe I've done it.

Like Enema Runner, I'm salivating over a short CT-190 (2.5-inch diameter) or CT-225 (3-inch diameter). I'd get those in 00-20 probably because the reviews are 5-star with 00-20 for both.

I think I can get it in with the 00-20, but I'm not sure if the slightly stiffer material might be too stiff. Anyone have a 00-20 and 00-50 toy and can comment about the relative "squishiness"?