Strap on enema dildo nozzle

Have had a sort of fantasy for years regarding getting enemas from a lady who is wearing a strap on dildo.

Ive now met a lady who is willing to do this to me, but i cant seem to find the equipment.

Firstly, im looking for more of a soft , pliable , jell like dildo thats not too big,as ive had a rigid one up me once and it hurt for hours after, so seek pliable, more life like one.

Either it needs to already have a hole through it for the enema to travel through, or some sensible ideas on how to make a clean hole.

Any ideas anyone please ? Bill.

This conversion should be easy enough with ordinary hand tools. You will obviously need an appropriate jelly dildo. Best thing to do would be to drill it out with a long drill bit. Choose a the correct size of drill tool that would allow you to pull a piece of latex tubing thru the entire length of the dildo. Use sandpaper to round off the protruding sharp end of the hose. Connect to your bag, and voila!

Hmmmmm.. where is my drill set?

If done right, this could be very erotic; if done poorly, it could be dis-asster.

I have had to make holes like this through silicone plugs for my prototype nozzles (see my gallery) and there is only one way to do it cleanly. You need to make a cutter from a length of small diameter steel tube. (places like Machine Mart stock tube rod sections in various diameters). Sharpen the end of the tube from the inside with a Dremel or a countersink bit so that the sharp edge is the outer diameter of the tube.

This can now be pushed through the rubber. Always make the hole much smaller than the tubing you intend to insert. Once I like the shape then I cast the plug with the hole in it by simply putting a rod in the mould.

Hi Bill

Just a thought.....there are materials you can purchase to make a silicon gel shape using a sturdy form. What if you used something like one of those aluminum cigar holders (maybe too narrow?). Then, place a greased wooden dowel the size of the opening you would like in the middle of the "form"....then pour the liquid ingredients in the metal tube (maybe grease sides also) and around the dowel. Tape the dowel in place so it stays centered until the gel has set up. You will still need to glue in some type of attachment for the enema hose...you can find barbed inserts at most hardware stores.....a few drops of super glue an you're ready to go. Let me know if you try this and how it comes out....the dildoe that is!

I've seen videos of girls with strapon enemas (like one called Night Shift). Where do they get theirs? Or do they make them?

Been looking all over the place for a strap on dildo that doubles as an enema nozzle, dont want a big one, just something comfortable , that my lady friend can wear it , and give me an enema at the same time.

Never seen one for sale, may have to buy a normal one and make a hole through it , maybe.

Any ideas folks.

I have a 18 inch purple dildo drilled out by a friend who gave it to me and administered an exciting enema to me by inserting about 10 inches into my bum, but not a strap-on, sounds exciting though, would be fun to be screwed while recieving your enema.

Where can one find a strapon for a twelve inch jelly dildo? Or a 12 to 18 inch strapon? Thanks!

Amen Bill! I've been looking for the same thing for many years. I tried to get the people at siliconenozzles.com to make a nice silicone strap-on dildo nozzle with a side attachment for the hose at the base. I even sent them two designs I dreamed up...one fashioned after the Tantus Intermediate Bend-Over...and the other much larger with 2/12 inch diameter base for retention. Every mistress I know loves the idea and I think it would feel GREAT!!! :-) Kly

Get a bad dragon dildo with a cum tube,

http://bad-dragon.com/

I have a couple I have used to give my self enemas.

I've used a dildo enema nozzle on my fucksaw to do what you are wanting a gal to do, butt solo. Expect a bit of MESSY! Be prepared!

If you bought a dildo enema nozzle like the ones available here; (it's a reliable company, I've bought good stuff from them) http://www.bdgsales.com/pages/products/enema.html

and cut the hose tube off flush with the base flange, then insert a right angle hose barb to let the hose go in under your lady's harness, you might have what you need. If she objects to the feel of the barb, try 1/2 inch of closed cell foam cemented to the base of the nozz...

ENJOY... I enjoyed my machine ride with the water flowing, not so much the clean up. :-)

I did find a way to minimize the mess with my dildo enema nozzle attached to my fucksaw. The major problem arises at pullout, if you have a suitable plug that can replace the dildo nozz IMMEDIATELY and accompany you to the toilet, most mess is avoided... just a few drops. I do think the easiest way to do this is to attach a dildo enema nozzle to a harness, rather than put a water tube hole thru a dildo. Mine works! Ohhh YESSS it DOES! BLUSH

I guess from what you've said that you're playing along. Sad! If you could find a woman willing to put the strapon on herself, she could do you standing in the shower and the "mess" could be avoided. This is one of my fantastasies. You should check out the first "Bing" search engine video that comes up after you type in strapon enema nozzle strapon video. I think you will like it. Have fun!

BuzzBee--What you need is not just a plug, but an inflatable plug so that you can inflate it as needed to stop any leaks. I have mine right next to me and lubricated so that as soon as I take my colon tube or nozzle out, I can get it in before I leak any significant amount. Check out the different toy suppliers and see what you can find.

hankb

Try this site............. http://jdnozzles.tripod.com/id2.html

Try this site............. http://jdnozzles.tripod.com/id2.html

OMG - that link just sent my imagination into overload - thanks for sharing!

@ AllenE thank you to remind me this shop / manufacturer. I found it years ago and lost his references, be assured the home link is allready saved before to write you.

1K & 1L to you

Well, whatever may have been there, the jdnozzles.tripod.com site seems to be gone already.

Siliconenozzles.com has made a custom strap-on nozzle, adapted from one of their larger colon tube products. I you make an email or phone request, Bob knows how to make one that will work beautifully - any diameter and any length + softness/firmness as you choose. Works well with leather or other strap-on harnesses using a rubber ring holder.