Colon Tube trick!!

Have been trying to use a 3/8" latex tube found in home improvement stores in USA for a colon tube insertion. But the tube (open-ended) always folded back or kinked after 6" or so of insertion. I molded a round 3/4" ball shaped tip using "JB Weld" so it would more easier pass around corners without folding back on itself. But I noticed it also needed some stiffening. So to give it more rigidity I found a smaller plastic tube that fit snugly inside the latex tubing. I cut the small tubing into 1/2" lengths and forced it inside the latex tubing. This segmented stiff tubing inside the larger latex tube now gives the latex tube some rigidity, so that on insertion with lube it is now stiff enough to not fold back on itself. I also use a rubber marine fuel bulb to pump same as the higginson pump. I now get the tube in about 18" with ease.

I think you are playing with fire. For one thing, making the colon tube stiffer (too stiff) may puncture your intestines. Also, having smaller pieces of tubing inside the main tube will make the cleaning process nearly impossible.

That is my opinion, be careful

I love a stiff colon tube and have described a number of things that I use in other posts.

Stiff is OK.

As far as cleaning the tube is concerned, you are right that a tube with small pieces inside will make cleaning difficult to impossible.

To stiffen most tubes, all you need to do is put a tube inside a tube (take apart for cleaning) and/or start out with a big fat tube with a thick wall where you have sanded and smoothed the end.

Why would you make a colon tube they are cheap to buy, easy to clean, and made to work well ...buy one and be safe, and have a great time with it

[quote author=LE-A link=topic=27449.msg261126#msg261126 date=1260318712]

why would you make a colon tube they are cheap to buy, easy to clean, and made to work well ...buy one and be safe, and have a great time with it

[/quote]

Because they are relatively easy to make if you have a few tools and a little mechanical ability, and you can make them to any diameter or stiffness you want.

Make mine stiff and fat! 😁 😁 😁 😁

Hi evrybody !

I often have made experience with differents sorts of colontubes.

Fr 32 and other sorts of selfmade tubes. I like have different sorts of hoses long way into my colon.

I often use my shower-hose for this sorts of experiments.

When you use a gentle stream on the water you can enter the hose longer and longer into you, and the corners or bends are easier to overcome when the colon fills fuller and fuller.

I am also thinking to make a ball on the tip to make it evan more easier and less dangerous.

Geez, you definitely want to avoid the really stiff tubes, you're going to puncture your colon.

Switchable suzie. I just love your request for a tube that is stiff & fat

Yum Yum! Love you for that

I agree with Le-A - just buy one. I just got a 40 fr silicon tube from optimal health - it is plenty rigid and I can get a good 18 inches in. (it's 24 inches total). Works great!!

I found some (huge) 3/4" diameter latex tubing in a hardware store, and is available in any length you want... just add a round plastic tip for easy insertion... be carefull!

[quote author=drn4321 link=topic=27449.msg266317#msg266317 date=1262469800]

I found some (huge) 3/4" diameter latex tubing in a hardware store, and is available in any length you want... just add a round plastic tip for easy insertion... be carefull!

[/quote]

Get yourself some sandpaper and smooth and round the ends of the tube. you probably won't need any plastic tip.

What kind of plastic tip are you referring to??

I have one I made from latex tubing. It's about 32 fr. I used a trick I saw on this site and folded 3/4" of the end of the tubing inward. That makes a nice smooth end. It's not too soft and works great. With a little lube and water flow I have can get it 24" in.

For the record, I don't think having one with any parts that can come off is a very good idea.

Enemalover1952, folding the tubing back into itself is an excellent way to firm up the end. To make it easier, dip the tubing in rubbing alcohol, gently grip the end with a pair of needle nose pliers, and ease it back into the tubing. For what ever reason, the alcohol makes it much easier.

Going to wrong store, Garden supply store have plastic tube for pond pumb they are thicker walled and don't fold

I tried to buy a colon tube at a specialty drug store here and they said I had to have a Dr's prescription to get one. Anyone else heard of that?

Yeah, just buy the one you really want to try - they are not expensive and you will be satisfied. Also, agree that making a colon tube too stiff could be very dangerous. Remember, insertion is half the enjoyment so take your time and no resistance is good. You might also try two smaller enemas to "prepare" for the colon tube and make that full insertion that much more erotic

A technique I have used with some success is to first clean out the recipient - gently, inject a good amount of KY, insert a "small" anoscope and thread the colon tube on through. You bypass the anal muscles that provide some drag, and give yourself a rather straight run. When he desired depth is reached, simply pull the anoscope back down onto the hose. Warning: Have padding underneath as there can be some mess.

New Tube/Hose end.....

Just found a small hard rubber ball about an inch in diameter and adapted it to the end of my latex colon tube. This ball while traveling up through rectum and up into the colon makes for some nice feelings. I also had .....as noted on my original post had put about 14 to 18 inches of 1 inch long segments of stiff hollow tube so I could help prevent the tube from doubling back on itself. I used the hollow shaft of some ballpoint pens. I feel much better about the safety of this large round shape of this ball going into my colon. Wish I could find a woman here in Colorado to share this with.

Ed "Anal Anything"

Rain,

I like your anascope idea.... amazing the ides we come up with just for anal-colonic pleasure!!

Susie,

I remember reading one of your posts that you liked your colon tube "The Bigger The Better!" Since I'm STILL having my tube fold back, I decided to try the larger and slightly stiffer tube ( a piece of black tubing, fairly thin wall, about 1/2" diameter with a 1" rubber ball attached to the business end and ....... guess what it went around the bends after plenty of water injected without any folding back!! You are so good at this. Wish you were my mate!!! Your husband is one lucky guy!!

^^^^ Thin walled tubing is a NO-NO.

The wall thickness should be at least one quarter the outside tube diameter.

For example, a 1/2" tube must have a 1/8" wall.