Can't find a Double balloon nozzle anywhere!!!!

Ski4ever,

Just a word of caution from someone who has purchased several silicone double balloon nozzles on eBay. I think these nozzles are all made in China and all mine have developed leaks along the balloon seams. I have tried repairing them with silicone sealer which works temporarily, but eventually will fail after a short time. I wish I could find the latex variety, I prefer them over the silicone nozzles. The latex balloons have a much softer feel on delicate rectal tissue. I have included a link to show where mine silicone nozzles have failed. And a thank you to Botox (I used your photo for my illustration).

http://www.zity.biz/gallery/image/91707

Try extreme restraints.com. I enjoyed being plug on both sides nut the outer ballon tore and now only able to use the inner one. It was too expensive to break so soon.

In my opinion this is a quality and long lasting product.

http://www.medtech3000.de/images/Ruesch_doppelbdr.jpg

http://www.medtech3000.de/doppelballon-darmrohr-ruesch-nach-gaul-doppelballondarmrohr-p-8.html

Agreed, Claudia! I’m a fan of these nozzles, and medtech3000 are a good company to deal with. Note—you have to buy a squeeze pump too, which is a separate item.

I love the xtra large (750/250), what a great feeling, filling me up and not be able to release.....WOW, can't wait to get another one. I have had several starting with the orginal latex b**Dex single then a double then a silcon then the xtra large. I was on my 2nd xtra large when the inside went "pop" yes it was inside, didn't hurt just had instant cramping as air went flying into the water solution. It was actually kinda good feeling.

I've gotten a few from Optimal Health Network on Amazon. They are silicone, 750ml and I think the external balloon is 250ml. The quality of the glue joint between the internal balloon and the tube is questionable. They are ok at first but sometimes begin to have a slow leak and the internal balloon deflates, which can be messy. I extended the hose to the inflater bulb and put a Tee fitting in it. I then attached a guage, the some one used in blood pressure manometers which you can get from Amazon inexpensively. I usually inflate the internal one with 9 pumps which reads somewhere between 80 and 100 mm on the gauge. If I find myself leaking or just before I get up to go to the toilet, I check the gauge and top up the inflation to get back to at least 80. So far no problem with leaking.

Some time ago when I purchased a double balloon nozzle it arrived in a packet from Rusch and printed on the packet was the contact number for many of their branches all over the world I contacted their branch in Malaysia (Penang) Fax (604)262 5669 and ordered another 2 double balloon nozzles 250/250 which arrived in reasonable time Can I say that the price was about $35.00 each so much cheaper than buying through ebay etc.

You can get a latex 250/250 from Germany, if you can deal with a German language web site.

One: https://www.medtech3000.de/Doppelballon-Darmrohr-mit-2-Geblaese-Darmkatheter-Ballondarmrohr::409.html

Two: https://www.medtech3000.de/Doppelballon-Darmrohr-Set-2-Stueck-2-Geblaese-Darmkatheter::484.html

Note: If you use Chrome, you can translate from German to English. Works good on my iPad Air 2...

Correct me on this - Converting the 69 Euros to US it comes out to about 83-84 dollars... that's a good price but wonder what shipping and any other costs might be?

I wonder if it would be worth contacting Medtech about a group buy? Might be able to save on shipping and get a discount. Anybody speak German or live in Germany and want to facilitate. I would be first in line to buy one.

I would be willing to get in on a group buy. I current have two on the shelf from my last order. But I only get about a year out of them.

Medtech charged me 35 euros for shipping through DHL. That's about $42. I think it's a flat rate for box

Www.extremerestraints.com/the-cleanstream-double-balloon-enema-nozzle.html

nozzles in stock hope this is what you are looking for

I see something similar on Amazon… but reviews are not all that great…

Are the dbl balloon nozzles from ER any good? I had a latex one I bought from Beth Tyler in 1985. It lasted for 15 years. Loved it!

Sadly, XR is just selling the same Cleanstream nozzle as many other places. That nozzle is notorious for having poor seals where the balloon meets the tube, causing early failure.

Best quality products are Rusch nozzles from medtech3000 or vetmed and the silicone balloon nozzles from Silicone Nozzles.

Years ago I had 2 Double Balloon Latex Nozzles. One had the same size 250 inflatable latex balloons and one had the 500/250 latex balloons. I enjoyed both of them bought years ago from Beth Tyler. Inserting them was part of the excitement of taking my large 4 quart enema.

Of course the larger balloon took more pumps to inflate and filled you up quite well but it was a little harder inserting in your anus by yourself. The regular balloon after a while just slid in with lubricant on it. My anus just loved the feel of their insertion.

Mostly I used the double balloon nozzles for my first enema of the day so I could confidently hold the 3-4 quarts of enema I took. I had larger penis nozzles and bat nozzles that I bought from the Beth Tyler site that would fill my butt hole nicely. All I had to do was just hold the nozzles against my anus and my anus would love to suck them inside all by itself.

I used to use Dr Bonners Peppermint soap for my first large enema. You only had to add 1 tablespoon or less to get the desired soapy effect but it would interfere with taking the large enema because of the discomfort you could experience.

I would take a very large warm plain enema first then for my second I would add my soap. Of course you would have to take a few rinse enemas to clear out the soap after. My rinse enemas sometimes I would take in the shower standing up with the bag hung high. I then would expel them there too because they had just water coming out. II would be squeaky clean after them.

Sadly, XR is just selling the same Cleanstream nozzle as many other places. That nozzle is notorious for having poor seals where the balloon meets the tube, causing early failure.

Best quality products are Rusch nozzles from medtech3000 or vetmed and the silicone balloon nozzles from Silicone Nozzles.

The Cleanstream product has improved as of late. I've been using one for 2-3 times a week for several months now and no issues. The newer ones have a larger distance between the balloons and they seemed to have improved their manufacturing as the one I have is showing no signs of failure.

My Klystra balloon nozzle finally failed after many, many years of use last fall and I purchased a Cleanstream and it promptly failed at the seals within a few uses. Took another chance and ordered another and this one is the one I've been using since the fall. Your mileage may vary but for the $60 or so I paid for it from Amazon I'm pretty happy with it so far. Also SN has not made a balloon nozzle for quite some time due to production and quality issues and they keep pushing out when they'll start producing it again. Don't hold your breath for seeing that available again anytime soon.

I bought from cleanstream and medtech3000, double balloon in silicone, latex and rubber and they are all excellent products.

Medtech charged me 35 euros for shipping through DHL. That's about $42. I think it's a flat rate for box

Jup, pretty mucht he going rate for anything across the pond…

The Cleanstream product has improved as of late.

@highfive That's good to know, thanks for sharing. Maybe I'll invest in one as an experiment, I've always wanted a silicone balloon nozzle and one with a bigger inner balloon.