Stainless steel chopsticks

I read somewhere about using stainless steel chopsticks( maybe on this board) We I've tried them now and they are brilliant. Use the thicker end which is nicely rounded, has anyone else tried them

I may have mentioned them a year or so ago after I got a set from Zabars NYC foods.

They are OK, but real sounds are better. Admittedly, yoju can get a dozen/six pair, for about $10-15, which makes them a bargain.

I don't like stainless steel ones for food because they are so smooth, small food pieces aren't held well by them.

I think the post you might have read was one of mine. Partnersub and I are great fans of SS chopsticks, and not for eating!

Ladydoc---I did a search for "chopsticks" and "chop sticks" and found posts by others, but not by either of us!

I guess we have more thoughts than we ever post!

I know I've mentioned them, but maybe not in a thread with those key words. Hmmm, very mysterious.

Here's the link to ladydoc's post about the chopsticks - I knew I had responded to it, so it was easy for me to find.

http://www.zity.biz/index.php?mx=forum;ox=display;topic=37434.msg322196#msg322196

SORRY, I didn't search "messages". Just a search. But I did find my post last February. Mima57's link works, but I couldn't get ladydoc's post to come up when I did a search.

Sometimes when I searched chopsticks, I found some posts and other times I searched, I got other posts, but never all of them on the same search of messages. The search seems a bit fickle when it comes to finding certain terms.

Well, just when I thought I heard it all and done most of it, along comes this stainless steel chopstick thing.

Whoda thunk it?! Now you got me interested. I googled them and came up with all different kinds. No dimensions are given except for length and most look like they're 9" long and tapered. Do the diameters vary or are they all about the same size? Some appear to be pretty thin on the small end, thin enough to be nearly pointed. I prefer nicely rounded going in my urethra. I see some are hollow, I don't think I would want hollow ones. Pretty tough to get the inside clean enough to trust in a urethra. Any pointers you good kinky people can offer would be appreciated.

^^^^ On mine, even the "square" ends you hold when eating are nicely rounded and that end is also rounded and smooth, so that end is perfectly good for insertion. In fact, the thin tapered "food" end is what we hold. We insert the other end.

We do that too. The "food" end is just a little pointy for my comfort (physical and emotional). Ours have a very gentle "twist" on the handle end. We don't just use them for urethral play, they do amazing things to the clitoris too.

Do either of you lovely ladies have a name brand you can recommend, a website or other place I can find them? I could just pick one of the many sellers on the Internet and hope for the best but that would be like picking a doctor from an ad in the yellow pages. Thanks

This is the vendor I used: https://www.everythingchopsticks.com/product_info.php?products_id=51&gclid=CKjVw-eGu6sCFUZ-5Qodrm9Cdw

but you can also go through amazon.com

Happy shopping!

Thanks, ladydoc. It looks like they have what will work. I can't believe how cheap these things are. If they were sold as sex toys they would probably be much more expensive.

I bought mine in a store, but those in the link look exactly like mine.

I hope no one is stupid enough to buy the glass chopsticks that link has for sale.

Just the thought of broken glass in my urethra makes my skin crawl.

Got mine on ebay

These look fantastic! Going to order a set to try out, good find!

Insertion of straight instruments into the bladder of a male is challenging. Try bending the chopsticks. One has to maneuver the instrument and penis down just so to make the bend. However metal catheters for men have a four inch radius of curvature to match the anatomy. If one looks at the cross section of male anatomy, the urethra descends from the bladder, and curves to a ninety degree bend to the front of the body, where the penis can take the urethra any direction. So if the chopstick is bent to a ninety degree angle, with the four inch radius, it'll be a cinch to insert. Make sure the curve is gentle and about five inches long. My 20 FR metal catheter is larger in diameter than the chopstick but drops right in. Here's how. First the instrument/chopstick has to be sterile: use oven and aluminum foil wrapping or pressure cooker. Have the straight end pointing up toward belly button, and curved end pointing down toward the body. Insert into penis, pressing gently on the top surface of the urethra, and pulling the penis over the curve and onto the straight part of the catheter/chopstick. As it goes back, the end of the catheter/chopstick will find the ninety degree bend as the urethra turns up to the bladder. Now push the end of the catheter/chopstick down, so the curved end inside the body rotates into the prostatic urethra. It will, with little pressure, penetrate the prostatic urethra and into the bladder. The penis/probe will be sticking straight out from the body. My metal catheter is 15" a little longer than a 13" chopstick. The penis is pulled over the length of the instrument. if one had a long penis, the shorter chopstick might not fit. My 'grower' type penis fits easily and I can pull the full length over the catheter. Unlike a rubber Foley catheter, I don't leave the metal one in for more than 20 minutes. It's not safe to walk around & do things. An erection with the metal catheter is not a problem. in fact using a vibrator with the catheter brings on an erection from prostatic stimulation. i have masturbated several times with it in. Semen just seeps around the metal. Personally I find the intensity not as good as without the catheter so i do it infrequently.

Everyone should only be using sterile equipment. If you are going to play with chopsticks then Bratwirst below has some good recommendations but I would ask him to repost with more specific information such as time and temperature.

Sterilization of metal chopsticks or metal catheter. A quick search on the internet--wikipedia--shows dry heat should be couple hours at 340 degrees. I make it hotter. A pressure cooker will bring things to 121 degrees Celsius. I overkill for half an hour.

The rubber catheters may be re-sterilized in steam if one has special bags used for surgical instruments or wraps. I only use catheters once. They are cheap and new ones are sterile.

I have a pair of stainless steel chopsticks that I have used for sounding my urethra for a couple of years now. I never thought of trying to shape them and make them curved so thanks for that bit of info bratwurst.

Stainless steel chopsticks will probably not bend into a smooth curve. Metal catheters are curved using special pipe curving and rolling equipment (I don't know what they are called) but years ago before I had better cars, I watched them bend muffler pipes while my car was being serviced and something like that is what you would need to smoothly bend a stainless steel tube as they will tend to kink when you try to bend it. -- I KNOW -- I have stainless steel chopsticks and they kinked when I tried to curve them.

Just the thought of broken glass in my urethra makes my skin crawl.

As well it should. It was a known method of interrogation by Gestapo and SD during WWII. Insert a glass rod or thermometer into the urethra, give it some hard whacks and start the questioning.

OMG sounding again. I'll stick to the wooden hashi myself. For eating food only.

I have stainless steel chopsticks and they kinked when I tried to curve them.

Only because you are so kinky. 😜

Or, here's a better idea yet still, buy a set of sounds on eBay. They are cheap and you won't have to worry about messing around. Not to mention they are not very expensive either.

Mashie

Not to mention either that if you buy a set of sounds you'll get a range of Fr sizes!

Even more importantly, the set of sounds won't have been (or shouldn't have been) in the cutlery drawer, getting scratched and nicked by the knives.

Oooh la - I'm reminded, again, about using fish tank tubing as a catheter. Get real folks - open your pocket book and let the moths out!

Big K, odd that you make the comment about the fish tank tubing. That thought came to my mind as well. As a matter of fact, I was talking to a member from here on the phone just a few nights ago and I told him that one of my jobs on here was to try and educate folks and keep them safe. The example I sited him was the fish tank tubing, lol. I think that was just so bizarre of a notion for all of us we still remember it well, lol.

Mashie

Fish tank tubing for a catheter? Yikes! But people get desperate don't they?

Fish tank air tubing has always been an old standby for catheters.

It's the right diameter, you can easily cut it with a scissors or a knife, it's readily available and it's cheap.

How could anybody go wrong with that?!?!?!