Favorite Enema Nozzles

First enema of a series I use the douche nozzle. Second enema is with the 3/4" metal nozzle and the 3rd or beyond enema I just love the colon tube.

Hmmm, I'm a huge fan of the large silicon double balloon nozzle, though I have just read below that people have has issues with holes and tears developing and prefer the latex version. I have had zero problems with mine, I inflate it to lemon size and and have used it an awful lot. Maybe I just got lucky with mine. I also had a Doc Johnson penish-shaped on that you could attach to a hose that was awesome, but I had it disappear during a visit and haven't replaced it. Both of the above were the most enjoyable nozzles i've ever had. Just loved them. Loved using them on subs so very much.

I have many but keep returning to the 6"long x 1.25" diameter black delrin from Klystra.

Olive enema tips or douche nozzle

For those who have had difficulty with silicone balloon nozzles leaking or tearing, they can be repaired as follows:

gently rough the adjoining surfaces with an emery board or something similar. Then sparingly use superglue on each surface and overlap them a little bit. Hold together for a couple of minutes, let cure over night. This repair technique has worked well for me and greatrly prolonged the life of a couple of nozzles.

Enematrainer10: I have the very same Doc Johnson penis-shaped nozzle, which I am pretty sure was originally sold with a bulb so it would act like it was a real penis coming, which I thought was lame in the extreme. It's much higher in my esteem since I thought to shove a plastic tube from the home store down the central hole, instant BIG nozzle. And it's longer, so it gets higher up, less rectal flooding, fewer failures.

But it falls out unless someone holds it in, the balloon nozzles are easier for solo sessions. Also, it stretches the anus, so it's nearly impossible to walk to the toilet without leaking. But it feels SO good, I am able to forgive its many failings. lol

My number one choice is a double balloon latex nozzle, It is comfortable, feels good just in there, and is pretty much leak free whatever you do. Just all around good.

I change it up,sometimes I go for the large headed white barium tip and sometimes I use one of the klyster nozzles.I have that little box with like several of them in there,I like all but the smallest.I have always wanted a double balloon but they are usually pretty pricey.I really dont like what im reading about the silicone ones breaking seeing as my lube of choice is vapo rub and despite never seeing it do anything bad to toys over the uears (Including an inflatable butt plug made of latex) id hate to have it ruin something as expensive of a silicone double balloon nozzle.

Where do you get the Wally Woodcutter nozzles that everyone mentions? I also use the Klystra 1.25"

black nozzle with excellent results.

For both giving and receiving I like either an open end colon-tube or a relative normal nozzle. I actually prefer if it is the type that someone needs to hold in place instead of it being the more secure type. If using a nozzle that is tapered the it is best if it is longer than 5" so it continues to slip in by itself. Not a fun of balloons.

I am a giver of enemas and my favorite nozzle to use on my sub is a single balloon inflatable nozzle. I am pretty sure(one never knows when there may be a malfunction) that if I put that in place the enema will stay inside no matter what. I like that feeling of sub not having to concentrate on keeping his enema in.

Never mind all the inflato-double-triple-balloon jobs!! An enema is an enema and I like the plain-Jane enema nozzle that comes as standard equipment with most bags. The "Douche" nozzles are nice too. The "antique" style black nozzles are nice but not readily available. I do prefer the ones that are the "slip on" type and you push straight onto the tubing as opposed to the ones that have the "screw in adaptor!!" Invarably they leak easily and "unscrew" at the most inopportune time!! I have found though to take the screw on type, wrap a small rubber band about 3 or 4 times around the end of the tubing and push on the screw-on tip thus forming a good "seal" so it won't leak! BTW, after your enema pull all your adaptors and tips off your enema tubing to allow it to dry thououghly!! Also the tubing won't take a "set" where the flange meets thus causing leaks! Also get the air in there to get it dry!! There's nothing worse than looking into the opening of a combo bag and see it turning dark with "Mold!!" Don't leave your bag wet and flat, combo or open top, hang them to dry with something keeping their sides separated.

It's just a "Click" away,

highwater

I have a rather large assortment of nozzles from which to choose, but my all-time favorite is a black rubber inflatable nozzle that works way better than any of my normal single or double inflatable balloon nozzles. Plus they are much cheaper than the balloon nozzles so that is a huge plus.

To vee_f2 and all others members who like to communicate about their nozzles .

Please offer yourself the pleasure to be well understanded , to share a little part of your nice and arousend feelings .

Make photos or take them from a catalog and put these "treasures" in your album . This will nt be a danger for your intimacy , or privacy ; and you will be sure that your readers will have the right understanding about what you was reading .

You can make photos under differents angles inflated and deflated .

This actions from all of you will be very helpfull to members who want to buy a new nozzle, because the photos you will shown are real photos with their weacknesses , and not professionnal photos who hide to the consummer the reality of the "item".

This is N O T a criticism this a proposal for a better and more efficient share of our fantasy .

Like MissStress says I have enjoyed the "pleasure !" of a nozzle slipping out of my ass , flowing on the ground , and me leaking a little bit on the ground too . After experiencing some problems like this , I prefer to use nozzles who stay by themselves in the rectum, letting the lovers enjoying their fantasy without risk of mess.

But I also love a hand against my anus holding the nozzle inside my rectum ;

my hand against her anus feeling her muscle clenching , living the enema that she is receiving ;

our enemas are sensual , involving no pain - cramps - or type of torture like

Mine is home made, one inch long with a bulb on the end so it settles just inside the inner ring. Water jets are on the side of the bulb, giving a sensational feeling as water hits the sensitive anal ring. Hose attachment is at 90 degree angle, so that sitting down during the flow is a good position!

My favorite so far is a hard white plastic barium style nozzle I got from Beth Tyler. Easy to insert, and multiple holes for water flow.

I've settled on Optimal Health Network's Nos. 514 and 515. I have both, and they share the top spot as my favorites. Both are made of Delrin plastic (whatever that is), and finely finished. When lightly coated with either Vaseline or a glycerin-based lubricant, either can be slid easily past a tight sphincter any number of times with causing irritation. No. 515 is especially good for solo sessions, because its strong taper and bulbous shape help keep it "in", once inserted. In their catalog, they list these as "economy" nozzles, but that's relative: at $32 a piece, they're anything but cheap. (But they're larger cousins, 1" diameter and made of black Delrin, are priced higher.)

I mostly enjoy taking standing enemas using a bulbous shaped nozzle that stays in better and prefer these...

When I take enemas on the bed like to use one of my double inflatable rubber nozzles which are much easier to insert and remove when lying down than standing up.

My favorite nozzle is a 20 or 30 inch red rubber 34 or 36 Fr. catheter. We use the 30 inch, 34 Fr. one the most.

the boxcar

My favorite nozzle is the standard double balloon. I enjoy the feeling of the insertion and then the pump up of the inner balloon. Mostly, I like the fact that I can relax and let the enema flow in without having to worry about the nozzle slipping out, or having to clench my anal sphincter to keep a nozzle inside. But, if I only have time for a 'quicky', then a standard douch nozzle will do the job, and I can slide it in and out several times just for fun.

Rolf E, I agree that the standard douche nozzle is fine for a quick job. I prefer the "big green" for regular work.

I prefer the douche nozzle to the standard nozzle. It is easier to retain and the flow is gentler. I would love to try a double balloon nozzle some day.

I like the fullness of either the double balloon or my aluminum nozzle. The larger aluminum one is cool on insertion but will take on the temperature of the water. If the enema is cool, it will start to feel cold, which is erotic; however, if the water is warm, it will heat up quickly and feel nice in my bottom. Mmmm!

My favorite nozzle depends on my mood and the time available. A medium size plastic nozzle from an inexpensive set is nice for taking a slow fill up with a little in and out action while the bag empties. The bigger green nozzle stays in place better which leaves both hands free to play around and work the higgonson type squeeze bulb. It also allows a much faster flow rate when time is limited. For real anal stimulation, the 1 inch diameter bat shaped nozzle is very pleasant but it takes a couple flushes with smaller nozzles to work up the flexibility for a comfortable entry.

I've tried a standard douche nozzle that came with the familiar drug-store combination syringe, and found it uncomfortable to insert -- kind of "scratchy" until the it was past the sphincter. Lubrication is never a question with me: I always use plenty. I looked at the nozzle carefully, thinking it might have a sharp line or burr on it (from the mold it was made in), but no -- it was smooth all over. I tried it again, and same thing -- ouch. A few days ago, I posted about two Delrin nozzles I found on the 'net, after discarding the douche version. M-U-C-H better! They're actually quite a bit larger in diameter than the douche nozzle, but go in glassy smooth. Expensive, but worth it.

I discovered at the start that the typical enema nozzle slips out all too easily. I made my first successful nozzle from a 1-inch-diameter, clear acrylic plastic ball, which I drilled through with a 3/8" bit, then glued-in a 6" length of acrylic tubing. This worked very well, and was held in by the sphincter fairly securely. It did tend to slip out during heaving cramping, however, so I have abandoned that for a Klystra KB-2, about 6" long and 1-1/2" in diameter at the widest point. It takes patience and lube to get it in, but it's never come out by itslef or leaked. I put a valve close to the outside end of the nozzle so I can shut it off, disconnect the bag, and use it as a plug for long retentions, even getting dressed and working around the house.

I find the barium nozzle that came with my Klystra Paris bag slides in easily and stays in well.

I prefer inflatable double balloon nozzle for my enema session. This nozzle is very useful for keeping injected enema solutions in place for a long time needed for a good bowel flush.

I'm probably old fashion but I still prefer the enema nozzle that comes with the standard 2 qt bag