Favorite Enema Nozzles

I used to have three "Silver Bullets" although one of them was black anodized, my favorite. I kept it in a small, antique leather "doctor bag" along with several rectal thermometers, a speculum and other play doctor equipment. After I moved across the country and was unpacking, I realized it was missing. That bag and all its contents never made it with all the other boxes and furniture. My speculation is that a curious mover decided he wanted that stuff and needed it more than I did!

@ericmacson

I may have the name wrong. It's the nozzle that has 2 balloons inflated with a single bulb. I LOVE that nozzle. I also like the one with the fluted balloons, but it does not seal unless both balloons are inserted.

Medtech calls that a "Gaul-type double balloon" but I don't know the story. Can't remember what the other type is that Ericmason is talking about. "UCH barium catheter" or "St. Bartholomew's" is the one where the first balloon is on "backwards" (big end first).

Medtech3000.de sells two models of DBC. One (Gaul type?) inflates both balloons with one hose. The other model is the Rusch (UCH Barium?) which fills each balloon separately with black inflator bulbs. I own the Rusch, but only get a seal if one balloon is inside my sphincter with the other ballon outside, so one pulls the other against the anus to make a good seal. I was just asking if the poster EnemaAndIvory actually got a seal without leakage if he says the nurse inserts both balloons into him.

Eric

Any old black douche nozzle is fine for me. A comforting giver and a bag of soapy water make a date perfect.

I do not we are not supposed to name brand names here so I will have to describe my "bullet" nozzle as looking like the Lone Ranger's ammunition for his pistol. lol. I also like black in color and douche nozzle is a favorite.

Either a douche nozzle or a barium nozzle works well for me as I am not into large volume or long retention enemas. Will usually use the barium for an SSE and the douche for the rinse

I do not we are not supposed to name brand names here so I will have to describe my "bullet" nozzle...

You can use most brand names, there is AFAIK only one who gets their panties in a bunch over the thought of people using their products for kinky reasons and will harass Webby even if you are using their brand name to refer to a catheter manufactured by themselves, evidently, which is overreaching somewhat.

The Silver Bullet can be named by name, as can SiliconeNozzles and most other ones.

Where can you purchase the real Silver Bullet?

Is is stainless or aluminum?

Is it true that aluminum nozzles are harmful?

I think the Silver Bullet is out of production unless you have a lathe or a friend with a lathe. There was a period in the 90s when aluminum cookware was supposed to give you Alzheimer's dementia, but they've stepped back from that. In any case there is not likely to be a significant amount of aluminum absorbed from an enema nozzle.

Stainless steel is more resistant to surface damage and chemically resistant, so it is easier to sterilize if that level is important to you. It is also heavier and thus gives a different feel. I'd be fine with aluminum, personally.

Old black douche nozzles, love them all. Also various double balloon, button tip, and colon tubes - as long as they are authentic enema items, and not made for sex play.

Hi,

all nozzles have their appeal. Today I prefer this, another time another. Sure, there are some absolute favorites. These include the thick black nozzles of the old women's showers. They exert a special charm on me.

regards

Neptun

I was very fortunate to have purchased a set of Klystra black nozzles 1” dia, 1-1/2”, 2”,2-1/2” which is the Titanic ( KP-1 ? ) . Have never found any other big nozzle (2-1/2” ) to be so comfortable. Anyone who has tried it agrees.

Unfortunately Klystra went out business years ago. They made quality items.

Several years ago, I got into woodworking. I have a well laid out shop now, with a nice lathe. I have made two enema nozzles out of a very dense, heavy wood. One is about 7" long and on the skinny side with a few gentle bumps. My fave is a 5"er that is shaped like the silver bullet. Mine is 1.25" in dia. at the fattest point. The curves are perfect, and they are heavy. They are both finished in "piano" black, and covered in "rod winding finish". It's a two part epoxy that flows beautifully, and when hard, is almost like glass.

I'm laying out a new design now. It will be a layup of several slips of wood, probably basswood, like a glue-lam. While the glue sets, I will put it on a curved jig to dry in a curve. It will be much more difficult to finish, because I will have to carve the final shape instead of turning it on the lathe. I think the extra work will be worth it. I'm thinking the head should be about 1.25 to 1.5 dia. Not sure how long to make it. Maybe 9 or 10" long, with the main body at about .75 to 1" dia. I'll end up with a one-off work of art!

Several years ago, I got into woodworking. I have a well laid out shop now, with a nice lathe. I have made two enema nozzles out of a very dense, heavy wood. One is about 7" long and on the skinny side with a few gentle bumps. My fave is a 5"er that is shaped like the silver bullet. Mine is 1.25" in dia. at the fattest point. The curves are perfect, and they are heavy. They are both finished in "piano" black, and covered in "rod winding finish". It's a two part epoxy that flows beautifully, and when hard, is almost like glass.

Sounds like they are lovely nozzles. Any chance you could post pictures, I'd like to see them! Curious how you bore the hole - or do you laminate two pieces with a center groove together??

fHappoy woodworking!! 😄

@gwhap, I'm so sorry, although I am quite adept at many things in life, computers and cameras and how they go together is beyond me! I get inspiration for shapes from Siliconenozzles.

If I'm turning on a lathe, I can bore a perfect hole while the wood is mounted, then it is pretty easy to get the outer shape where I want it.

If I am carving, I lay up the blank with thin strips of wood. As I'm laying it up and gluing, I leave a hole in the middle of the blank (easier than it sounds), then clamp it to a curved jig to bend it. A silicone tube is inserted, so that everything sets at the same time. From there, it's just carving with a Dremel-like tool. Custom made by me and for me (and my close friends!)

The one I keep coming back to for most of my 3-qt enemas is the 5-inch flexible Triangular tipped nozzle.

When I do occasionally take a 4-qt I have a somewhat wider 5 inch rigid white nozzle.

The one I keep coming back to for most of my 3-qt enemas is the 5-inch flexible Triangular tipped nozzle.

When I do occasionally take a 4-qt I have a somewhat wider 5 inch rigid white nozzle.

Lisa,

You don't ever use DBC catheters, even for large volumes?

Eric

I prefer my own homemade nozzles, I've found the bat shaped nozzles, about a 7/8" at the distal end, about 1/2" at the small proximal end. Once properly lubricated it slips right in and retains itself. I've made others, various shapes, one with a bulb on the distal end, once inserted, tended to leak, another with several undulations, if that's the right word, thought it would be more pleasurable inserting, but found it didn't make a lot of difference. Simple is good. I should try one a tiny bit larger in diameter, but 7/8" delrin was the largest I had at the time.

the hoseman1

I like flex tip enema nozzles that stay in and don't leak. Also nozzles with a large head that fill you up. I also enjoy traditional medical nozzles, old hard rubber curved nozzles and douche nozzles

The double balloon is my all time favourite. The sensations from pressure of one balloon on the perineum, the other on the prostate are delightful, especially combined with the inflow of warm water. The inner balloon gives you something to work your muscles on and allows you to enjoy an orgasm without fear of leakage.

I like my P-nozzle from Klystra a lot but the enema nozzles in the SiliconeNozzles catalog look great. I'd like to hear the experiences of people who have ordered from them, especially the inflatable, Model B, Model C, and their colon tubes.

Also start out with several bulb enemas before using my 3 quart blue bag. Then I use my double balloon for the first bag - then the 30” colon tube. The double balloon feels so good as mentioned - the inner balloon kisses the prostate while the outer balloon massages the perenium. The colon tube caps it off as it meanders through the bends in the colon while slowly injecting it’s warm pleasurable contents!

I like my P-nozzle from Klystra a lot but the enema nozzles in the SiliconeNozzles catalog look great. I'd like to hear the experiences of people who have ordered from them, especially the inflatable, Model B, Model C, and their colon tubes.

@bob2, here's a link to a lengthy review of products from Silicone Nozzles. I'd also suggest just looking through past threads and you'll find info on other Silicone Nozzles products.

https://en.zity.biz/index.php?mx=forum;ox=display;topic=93357;all

Deb

@bob2, here's a link to a lengthy review of products from Silicone Nozzles. I'd also suggest just looking through past threads and you'll find info on other Silicone Nozzles products.

https://en.zity.biz/index.php?mx=forum;ox=display;topic=93357;all

Deb

Deb is a wise woman.

@bob2 I’d be happy to share my perspective on my Model B, C and others. Feel free to message me or take a look through my contributions to the discussion boards and my albums where I have added comments.

Thank you for the information and advice debgurl and Loveitkinky. I really appreciate it.

I used to have a flexible green rubbery nozzle with a flared tip and multiple holes, I don't remember which mail order company I got it from. It was the best. I also got a big hard plastic black nozzle from the same place. It was shaped like a baseball bat. It was a disappointment, too rigid and uncomfortable. One of those things you don't know until you try it.

Bought long time ago may be Klystra, bought more recently probably Optimal Health.

When Mom gave me enemas into my teens it was always with the enema nozzel . But when she was out a d I was alone in the house, I started using the douche nozzel on my self.

Fast forward in my early 20's ,I a swered a ad in a the Village Voice from a lady who did enemas , a d was looking for clients. I went to her home after phone calls back a d forth. She had a very traditional kind of house. We sat in her living room the first visit. She explained she wasn't a prostitute there will be no sex. I would pay in advance . I would arrive on time for my appointment , never early , never late , or I would lose my payment. I would be freshly showered and in clean clothes . She made me pay her right then for a appointment next week. I was told to bring her door bell at 4:00 PM the following Tuesday .

I arrived at the appointed time. She brought me down to the basement . She smiled and told me I was her youngest client ever , a d she was looking forward to working with a young boy . I was 20 at the time. She told me most of her clients were mature gentlemen some were younger in there 30's and 40's . But I was the youngest and she was going to enjoy this.

The basement was set up like a hospital exam room. There was a combination bag hanging from a I.V. pole . But the nozzel was something I never saw before . It was a balloon tip type . It was big and thick . She squeezed a little bulb that was attached to the top, a d a balloon expanded. I was scared ,I told her I didn't want that I wanted the regular tip or the douche tip. She smiled, was very kind and reassuring , she said that's what they all say the first time they see it. This is what is used in a hospital. She said after I try it , I will always want it like this.

I was scared, nervous, reluctant, but a little intrigued, a d interested. She inserted it,it took a little while for it to be inserted. She was gentle let me get use to it and the feeling of it. She inflated it slowly letting me get use to it and accept it.

She was expert at it, told me she was a R.N.Nurse for 25 years in a hospital and did this thousands of times. . It was a experience I will never forget . Better then the enemas Mom gave. I went back to her for about 2 years maybe 15 times. One day I went there after pre paying again. The house was empty, she was gone. Never saw her again. But will always remember her holding the nozzel and inflating it to show me how it worked a d what it will do inside of my rectum.....toni

My fav is a silicon retention type that is somewhat similar to the classic plastic douche nozzle. Flared head with good stop base. I have two of them for both silicon bag and ss bucket.

My favorite nozzle would have to be a 54fr colon tube that is about 36in long. It is my go to nozzle for my second and third fill in a series. I am planning on replacing it with colon tube from Silicone Nozzles. Looking forward to placing that order.

I love having a bigger nozzle Inserted. Having that full feeling is amazing . At some point I would love to try a long nozzle or colon tube.