Simple, dependable siphon from gallon plastic water jug.
1. Put a black straight tubing coupler into the suction end that drops onto the bottom of the plastic jug.
2. Use a common plastic enema clamp that hangs on the lip of the jug to hold the tubing secure and properly set onto the bottom of the jug of pregnant juice.
Set this way, (without a higginson pumper) place the jug on the sink prep area and use the faucet to blow the air out of the tubing and fill it with coolness. Clamp it off close to the end and apply what your butt is about to receive.
If you take the aerator fitting off of the faucet, your tubing will slip up into the water spout a little and the tubing hose purge will go much smoother.
A Higginson pumper makes it lots easier, all the way, but consider a simple modification just for fun. Take the tiny flapper out of the exhaust valve of the pump. When you prime your hose: squeeze the bulb, Kink the hose on the exhaust end and let it draw water from the jug. Later you will discover the advantage of this mod.
Soon you will feel a water baby weighing on top of your belly button, causing you to breathe differently from your weighted diaphragm.. You butt will suck on its nipple and savor every drop.