Balloon Nozzle

Well I bit the bullet and bought me a double balloon enema nozzle from Amazon this past weekend. It says it will be here on Sat. Can't wait to try it out. It is made by Clean Stream. I have had one of those once before and I have always wanted one myself, now I got it.

The double balloon nozzle is my wife’s choice when she gives me a “punishment” enema.

I have two Clean Stream silicone bags which I think are excellent. I look forward to a report on the nozzle.

The double balloon nozzle is my wife’s choice when she gives me a “punishment” enema.

@ew68,

After she inserts and inflates your inner and outer enema DBC balloons, what does she do to give you a punishment enema (Solution, volume, speed, hold time, tasks during retention, etc.)? why do you get them? Thanks,

Eric

@ericmacson We really use the word “punishment” as part of our play. She may decide to punish me for any small reason. Usually I am spanked first. The enema is usually 2-3 quarts of warm, soapy water. Not given fast, but hold time is usually required. It’s been as much as 10 minutes but never anything specific. I have never been given tasks during the enema. I guess she feels holding it is task enough.

After a great many years of all kinds of anal fun I have decided it's time I tried a double balloon nozzle. In the past I have seen ones made by a company called Klystra who seen to have ceased trading. I have looked at some Clear Stream silicone ones on e-bay here in the UK at around £89 but the reviews seem a bit mixed. My questions basically are do they come in different sizes? Equally imprtant are they any good? I would be interested to hear of people's experiences…Thanks

The Amazon reviews aren't very good on this nozzle. The range from the balloons breaking to the balloons being too far apart. Mine is holding up so far, butt I agree that the balloons are too far apart. I like how big the inside balloon is. It almost makes up for the spacing.

I had an older Latex Double Balloon Nozzle that lasted many years. Eventually, it stopped holding air so it was time to replace. There were once much better silicone ones. They were very expensive and supposedly were very well made and held up well. I missed that version, but eventually purchased the Clean Stream one from Amazon. Upside, the price was less than half. Downside its only ok for durability. Mine still inflates, but the tip has split after not that many uses. I will look for some silicone adhesive and see it it can be repaired. Would I order another? Probably. But they are only so-so quality. It does work fine however and the inside balloon is a big size. Key is don’t over inflate either. The inside one feels good when inflated and really helps with retention of a big enema! Side note - while it is silicone, use with coffee or other colored liquids will cause it to become discolored and I have not been able to make it clear again with peroxide or other safe cleaners. It is clean but stained. If you get one - Enjoy! It is a pretty cool toy for our kink!

I had one of those before and was junk didn’t last very long at all

OK here's another thought. I guess many of you will have seen one of the many German enema / medical / gyno movies that are out there. Often they seem to use a double balloon nozzle which looks entirely fabricated from latex or rubber with red hose & egg shaped smooth balloons? Some of these clips are not too old so where the hell do they get their equipment from. PS One of those stern looking teutonic high he

OK here's another thought. I guess many of you will have seen one of the many German enema / medical / gyno movies that are out there. Often they seem to use a double balloon nozzle which looks entirely fabricated from latex or rubber with red hose & egg shaped smooth balloons? Some of these clips are not too old so where the hell do they get their equipment from…………..

@alan20cm,

Can’t prove it, but it sounds like it’s from

Medtech3000.de

in Germany. The direct link to their page for that catheter you describe having a red hose is

https://www.medtech3000.de/Ruesch-Doppelballon-Darmrohr-nach-Gaul-Doppelballondarmrohr::8.html

which is displayed in German. I used Google Chrome set to Translate Page which works well. They offer several single- and double-balloon models in two basic designs. Just recently I bought 2 of their other design latex Double Balloon Catheters which work well for me.

Eric

Hi Eric, You are my official hero for this month! I have viewed the entire Medtech3000 site but so far not been able to translate it. No matter I fully intend to order the more expensive of the two double balloon nozzles on offer at around E100 along with a Higginson's pump & also an interesting tapered flexible stretching (slightly tapered) catheter at around E15 although if I'm reading it correctly the diameter at 14mm might be a bit much. Anyway I can't wait to try the nozzle which looks a real high quality item & enjoy that sense of urgent fullness which I won't be able to expel until the balloons are deflated. Now if only they could supply a stern high heeled rubber nurse to administer….Al

Hi Eric, You are my official hero for this month! I have viewed the entire Medtech3000 site but so far not been able to translate it. No matter I fully intend to order the more expensive of the two double balloon nozzles on offer at around E100 along with a Higginson's pump & also an interesting tapered flexible stretching (slightly tapered) catheter at around E15 although if I'm reading it correctly the diameter at 14mm might be a bit much. Anyway I can't wait to try the nozzle which looks a real high quality item & enjoy that sense of urgent fullness which I won't be able to expel until the balloons are deflated. Now if only they could supply a stern high heeled rubber nurse to administer….Al

@alan20cm,

Have you tried going to the MedTech3000 site using Google Chrome browser or any other one that has a built-in translator/interpreter? For me, using Safari it appears in German, but with Chrome it translates the entire webpage into English very rapidly, perhaps 20-30 seconds.

The DBCs I have from them are the all-yellow-latex double balloon model with 2 black inflator bulbs, one for each balloon. My earlier ones from Beth Tyler and elsewhere were made by Rusch and to me were just about perfect. These new ones from MedTech3000 are slightly different with the balloons slightly farther apart, but so far still work well. They don’t say “Rusch” on them, but I haven’t taken the time to ask MedTech3000 who actually made them. I think the red catheter/yellow balloons model you refer to is made by Rusch. Using my prior ones, they could hold back and almost perfectly seal in 4 or even 5 quarts for as long as I liked. These days being solo post-divorce, my usual is 4-4.5 quarts which my DBC holds in for at least an hour.

My preference and only comment on your last line “Now if only……” would be that the stern rubber nurse or Domme making me take and hold the (large) enema would be wearing thick rubber sneakers like Converse Chucks or mesh running shoes instead of heels. Thanks for your interesting reply. Enjoy yourself with those DBC balloons inflated, even before your enema starts running into you.

Eric

OK here's another thought. I guess many of you will have seen one of the many German enema / medical / gyno movies that are out there. Often they seem to use a double balloon nozzle which looks entirely fabricated from latex or rubber with red hose & egg shaped smooth balloons? Some of these clips are not too old so where the hell do they get their equipment from. PS One of those stern looking teutonic high he

@alan20cm,

Can you post a link to one of the “………many German enema / medical / gyno movies that are out there. Often they seem to use a double balloon nozzle………” showing an enema and a DBC? You sound like you’ve seen many, but I have only one specific one in mind that I can recall and locate on a current porn site. Thanks,

Eric

I need one too but I hear some are cheap and fail. Always wanted to be plugged good

Based on recommendations here on Zity, and because I've been so drawn to the yellow/orange color of that Rüsch double balloon nozzle, I finally ordered one from MedTech3000 myself (using that nifty Google Translate technique on Chrome to navigate the site). I've been wanting that nozzle for years. I did the combo pack, which comes with the yellow double balloon nozzle where each balloon is inflated by separate pumps: https://www.medtech3000.de/Doppelballon-Darmrohr-Set::495.html

Both of these nozzles are everything I'd hoped they'd be. A really cool addition to the collection.

Further to an earlier query the German enema / gyno / rubber porn site I was referring to is spekula.com There is also a link there to their own ‘toyshop’ but curiously you can't buy a balloon nozzle there! A lot of the movies feature the deliciously pervy Ina who could fill me up any way she wanted!

@alan20cm (and others)

Let me add from my experience.

The latex double balloon enema nozzles from medtech are first rate. The balloons are generally “smaller” than the ones from CleanStream but will seal you well if you are willing to take the time to properly seat the distal balloon in your rectum before inflating the outer balloon. Note that the latex rubber may break down over a period of time and never, ever over inflate the balloons. You may not rupture them immediately, but every balloon has a weak spot and over inflation finds it faster than just about anything else.

There are two distinct CleanStream double balloon nozzles and one is more expensive and more difficult to find than the other. From my experience, the problems/complaints about the CleanStream nozzles are mostly associated with the less expensive model.

The more expensive model is the RU710 model. It is physically longer and has high quality inflation bulbs with chrome plated valves. The nozzle (at the business end) looks very similar to its less expensive cousin. It is different, however. When this nozzle is inflated, the center tube that delivers the enema solution stays straight and does not bend as the distal (inner) balloon is inflated. The balloons are physically a little bigger than the less expensive cousin. Amazon did sell this model but it was replaced with the less expensive one. I have only found this more expensive model on E-Bay.

The less expensive model that you find on Amazon and E-Bay is a little shorter, has larger inflation bulbs that are fitted with plastic valves with a a spring-loaded deflation valve. When the internal distal balloon inflates on this one, you will notice that the nozzle will curve inside the balloon and the nozzle tip is no longer straight forward. This doesn't adversely affect the nozzle's performance. It just means that the fluted balloon section is not designed precisely to deal with the inflation of the balloon without bending. The other weakness is the plastic, spring-loaded valves. Unfortunately the inflation tubes are pretty large in diameter and replacing the bulbs with better bulbs may be difficult because you need sufficient diameter to seal the inflation arms. Where leakage occurs is somewhere between the valve stem and the valve body. This causes the balloon to deflate. I've found success in sealing this connection with Gorilla glue.

After rupturing a couple of these balloon nozzles out of carelessness or overinflation, I've gotten pretty good at keeping them a long time. I've held some pretty massive enemas a ridiculous amount of time with these nozzles; a 4.5 liter warm baking soda enema for nearly two hours and a 3.5 liter soapy/glycerin enema for more than 85 minutes. I can't hold every enema that long, but it's nice to know that it is possible. In addition to my Model-B nozzle, I always travel with one of these double balloon nozzles.

Another vote for medtech here, I prefer the Rusch one out of the two but have both and alternate to keep things interesting. In the past I just had the one with the 2 separate inflators and over time it did degrade a bit.

Their 3L blue bags are also great.

I have the Clean Stream from the big online store. My experience has been it is okay. Nothing special and didn’t expect it to last long according to the reviews posted there. But, after 5 years, it is still fine and no signs of any eminent failure. The outside balloon is slightly off center, but that doesn’t affect the performance in any way. It was convenient, cheap and delivered discretely. It functions fine and is silicon. No complaints. Enjoy it as I have.

I prefer the e-z-‘‘em inflatable…my experience with fluted balloons has leakage around the flutes. Inflating to max to seal is dangerous, as it can tear the rectal wall. The single balloon ezm one forms to the wall and makes a leak proof seal…you can buy them at optimal health network.com for $25..

The older latex balloons held up better than the clean stream product. They're still out there but twice the price and hard to find. The inflator bulbs that come with the clean stream have junk valves in them. Leaky…

My challenge is that a standard double balloon, even the “play” version that has the larger internal balloon, don't seal me very well.

I did try the nozzle that siliconenozzles.com made for a while. Was part of the initial order. Nice product, well made, great seal, unique design and heavy duty as hell! Unfortunately the ergonomics of that one were uncomfortable to me for more than a few minutes and they don't seem to be available now. I also think they got in trouble selling those as technically, they are a medical device under US law.

I must say nothing feels like having a double latex I inflatable balloon nozzle fully inflated holding you tight from inside and out..yes we definitely prefer the older style latex style. We ordered them from a company in Germany which are wonderful…I myself I find the lose of control

Had a German amber / stiff latex double for years until it finally broke. I was so sad over this that I didn't know if I should throw it out, or give it a burial.

@Enema_Runner do you have a link(s) to where you get your balloon nozzles?

Well, after a delay maybe due to customs or something my double balloon nozzle arrived recently. I like it a lot. Easy to insert & pump up it makes retaining a large mildly soapy enema easy. Only wish I had an obliging rubber nurse to administer it! Not wishing to damage an expensive new piece of equipment I am probably being cautious about how much I inflate the balloons as somehow I wish they would just grip my anus a bit more firmly…nonetheless a well made item which I am sure I will enjoy again & again. Thanks to all those who have offered info & advice.

Lucky, I'd like to try a nozzle like that.

I give mine Medtech3000 (Rusch) nozzle 4 full squeeze and maybe a little piff. It has now been in use for more than 8 years once a week. I just love the way it works.

@Enema_Runner, In your post #18 below on 4/17, you began by commenting:

@alan20cm (and others)

Let me add from my experience.

The latex double balloon enema nozzles from medtech are first rate. The balloons are generally “smaller” than the ones from CleanStream but will seal you well if you are willing to take the time to properly seat the distal balloon in your rectum before inflating the outer balloon. Note that the latex rubber may break down over a period of time and never, ever over inflate the balloons. You may not rupture them immediately, but every balloon has a weak spot and over inflation finds it faster than just about anything else………………..

Would you just clarify or expand a bit on two of your points?:

1) recently I bought 2 of the MedTech German latex DBCs with 1 inflator bulb for each balloon. I bought the ones from MedTech this time because I had owned Rusch models for years but couldn't find any in the US any longer. The MedTech catheters are not Rusch, but are extremely similar but with the balloons slightly farther apart. Would you just briefly reiterate how you seat your distal rectal balloon again?

2) How do you decide what constitutes overinflation? I never recall seeing directions, only comments here by users. I’ve produced a good seal by using anywhere between 5-6 up to 10-12 bulb pumps.

Thanks,

Eric

@ericmacson

Sure, no problem.

Hope that helps.

ER