I use my homemade shower shooter frequently for rinses while showering when time just doesn't allow for full enema sessions. Made from inexpensive readily available materials at hardware store.
Handle: 1/2" PVC Sprinkler Riser - 8-10 inches
Nozzle: 1/2" PVC Sprinkler Riser - 6-8 inches
Exit Tube / Finger Valve: 1/2" PVC Sprinkler Riser - 1-2 inches
1/2" PVC T Fitting
5 Minute Epoxy
Cut threads off nozzle. Smooth sharp edges with file or grinder
Mix parts A&B Epoxy well onto a disposable plate, jar lid, etc. Dip business end of nozzle into epoxy repeatedly to pick up as much epoxy as possible. Roll the nozzle mid-air until the epoxy begins to set. Gravity and rolling will make a delightfully smooth edge. Continue to add epoxy as it begins to harden by dripping from a rod, Popsicle stick, pencil, etc onto nozzle. Continue rolling 5-10 minutes until it no longer runs or drips. You can add size to this rolled edge with additional coats if you like. Let epoxy cure several hours or overnight.
Screw it all together, connect to shower hose. Place finger over the exit tube for a fill, and remove finger to drain. Repeat as needed. Enjoy!
https://en.zity.biz/index.php?mx=gallery;ox=showalbum;ax=10070