Finally I got my Square Peg depth probe....

Finally I got my Square Peg depth probe, and to honest; it's amazing. However I haven't been able to push it past the sigmoid bend (around 30 cm/ 12 inches). I did a totally clean out and after that, I injected a good amount of J-lube via my colon tube into the descending colon and out.

I have tried, on the back, left side, right side, standing, sitting, knee chest, relaxing etc., but without luck. Any one with a good trick?

PS: I won't consider myself as a newbie in anal fun. I have done anal games, enema, toys, fisting for more than 25 years.

I just looked at SP. what exact model or name is your "depth probe"? Thanks.

Eric

It's the 1" x 38" model.

https://www.squarepegtoys.com/shop/depth-probe/

Thanks, refdk. Someone posted a video here a few days ago of a German fetish actress putting what I think is a SP 21" Slink probe. I'd love to play with it but it's much too wide for me at the base, but the one you have is only 1" overall, and I couldn't find a long one that would be close to the maximum I can pleasantly tolerate (~2"). Do you find the 1" version satisfying from the effect on your sphincter?

It has a perfect size but it's on the good side of 1", and thereby gives a full feeling. For me, with this toy, it's a matter of going the full length, I hope I will succeed but it will require to get past the first turn.

Refdk, I'd love to be able to give you some advice other than, take your time and be careful. I'm sure you'll get the hang of it and figure out what to do.

I'm a huge fan of the Squarepeg line up and have been considering the 38" depth probe so for sure will keep an eye on this thread to see how you get along and what tips and tricks you come up with. For the meantime, I'll stick to enjoying my Squarepeg Slink (large size, 21" length) which I love.

Haven't gone past the firs turn yet, keeping getting stuck at approx 30 cm. I have tried a ton of different positions but no luck. I have practiced with my colon tube, trying to figure out what's blocking the way or putting it another way, figure out a way past. I'm sure I will succeed but I still have a way to go.

Any tips are welcome........

You gotta love that name, Square Peg. Just what you need for your round hole. Isn't marketing wonderful. Best of luck getting it where you want it to go.

Maybe I should go for SquarePeg Slinky, to guide me the way.

I just ordered the Square Peg Worm. It's the 10 in one. I can hardly wait.

Since I haven't succeeded going past the bend, I will try the SLINK to see if that's the opening up solution. Just ordered it this week, just waiting.........

Got the SLINK, nowI just need to find the right moment ?

I have a silicon colon tube 75fr that I got from Silicon Nozzles (see pic on my profile page). Getting it into the descending took some time and patience. Here are some what I hope are some helpful insights into doing deep colon probing.

First a complete and total colon clean out is necessary to make sure the highway is smooth and clear. Lots of lube, the more the better. I don't attached this colon tube up to the water from the enema- I am just using it as a colon snake.

OK, then I start slowly working it in and up. It is large enough to feel it under my skin which helps since I can guide it by pushing on it. Slowly but surely I can advance it. But on some occasions I can't get past the sigmoid bend and do have to stop. On the occasions that I can get past the bend, it takes time and a combination of guiding with one hand and pushing with the other. I have found it helps to lay on my left side once I hit the sigmoid to get it through that part of the colon. Once you do clear that bend then all of sudden it begins to move easily and I can feel the bulge move up towards the bottom of my rib cage on my left side. At this point I have inserted in well over 20 inches.

My final thoughts is that you need to be patient and realize you won't be able to make it this far every time you try. Always stop if you feel pain from the pressure of trying to advance the snake. Some days it just isn't going to happen.

It really takes time. Be patient! Now I can let 27 inch dildo all the way in. I always use the position just like you want take a bow. It works very well. And remember don't keep pushing. Always let it in and out, in and out, slowly. Hope the idea can help you out.

I agree with sshine--you need to be patient, use as much lube as needed, and move it in and out slowly so that you do not force it and make it double back on itself. I find also that I need to have perhaps 2 qts in before I can get to the top of the descending colon and have a hope of getting it to go around the bend there. Perhaps you need to put in more than 2 qts to inflate the colon enough to make it around the bends. That is why I do at least 4 qts, perhaps even 5 or 6.

hankb

Is everybody here solo? Seems to me, we should all keep looking for partners

I have the same Squarepeg probe and I love it! I also have the Silicone nozzle 1" x 36" colon tube which I use to exercise my sigmoid. The colon tube having the tapered end (Note: I do NOT have one with the bore hole) allows me to get it all the way inside before using the Depth probe. One thing you may not have realized is the Depth Probe is actually 1.,25" at the head and then drops to 1". For me the extra 1/4" makes a difference!! Give it a little time though and it will be worth the wait. Oh will it be worth the wait. The Depth probe probably took me a week or so of trying before I was able to get it in and it has become my favorite toy. It still takes some time to get it in but it gets easier and easier once you find the best position. For me it seems when I am either standing up straight or lying on my side in a straight line I have a much easier time getting it in. And lots of lube.There have been a few times I have gotten the Depth Probe in without anything else being used first (I usually use a 5/8" siliconenozzle with bore hole to clean myself out with thoroughly before using the Depth probe. If you have any more questions just send me a message. And I am a solo user but my GF is wanting to have the fun of sliding in my Squarepeg Depth probe and wants to start playing with the colon tubes herself. LOL