DIY / Homecrafted Anal Toy / Sex toy(s)

I'm thinking to 3D print toys but can't find models.

Need to study 3d modeling

Back in the eighties I made an inflatable balloon butt plug. A pleated “party” balloon, a short piece of latex tubing and the squeeze bulb from a blood pressure cuff. After a series of clean out enemas I'd fill up with a 3 ½ quart wine and warm water bag. Then I'd insert the balloon and pump it up to the size of a small grapefruit while taking off on a wet sexy ride😜😈😜

I bought a 50mm plug but couldn't find any plugs that would stretch enough to make it easier to use. Most of the plugs had fairly thin necks which made then useless for stretching.

So i made a couple of wooden plugs myself, from mahogany, with multiple layers of varnish and then polished to a high gloss. These were perfect as i made one with 40mm and another with 45mm and fairly wide necks to keep me open. A few minutes with each and I was perfectly ready for the larger one.

I have made many electrodes for my e-stim kink. Some are anal inserts and some are external wraparound. I have saved myself lots of dosh mimicking the expensive commercial versions. Stainless steel drawer knobs are ideal but you must steer clear of the cheaper nickel plated versions you don't want shards in your rear.

I find the moulding plastic beads are porous and difficult to keep clean. I give them a coating of liquid latex to seal them before use. The latex can be re-applied if it deteriorates.

A few decades ago when I still ran a shop, I'd sometimes make anal plugs out of hard beech-wood. I'd buy round lathed lengths of wood and then shape it into various shapes by carving/filing and sanding.

Once finished I'd give them several coats of high gloss varnish so they were almost as smooth as glass.

I still have them, but rarely use them anymore since I originally made them when quite inexperienced with anal stretching. Hence they were more like a beginner's set of plugs. They are now far too small to do much of anything sensation-wise.

Susie had her husband cut down a baseball bat to about 20 inches, rounded the end and polished it with several coats of polyurethane. Gave about a sixteen inch insertion and the knob on the end served as a handle for maneuvering it.

https://en.zity.biz/index.php?mx=forum;ox=display;msg=688814

When I first started with anal I made a very basic toy out of an old juggling club. It was plastic, horrible, and I can not recommend it.

I once modified a vibrating plug and had the motor attach to an old xbox controller. Made some games more interesting.

Recently I tried bashing together an enema backpack that sort of worked. I think I can get that to work better once I figure out how to increase the pressure as the height distance wasn't enough.

Most recently I have been experimenting with using agar agar to make improvised single use toys. You don't need much for the jelly to be firm enough for entry, it remains gelled up to around 80 degrees Celsius. I've tried small inch wide balls that can be inserted en mass (over 40 of them) and the ones that got lost worked them selves out without problem and the bodies natural action broke them up.

Soon I want to experiment with thicker and firmer mixtures to see what it can handle. But it is a food product intended for vegan jelly so single use only otherwise it will go off

I once built a 10-inch rigid sigmoidoscope out of ordinary plastic plumbing supplies. I began by fashioning ¾ inch PVC pipe into a hand gun shape with a 10-inch barrel. And then I turned an obtrurator on my lathe. I then made an eye piece cap using a lens from a pair of reading glasses that had a miniature lamp mounted on a stiff 10-inch wire for illumination. And finally, I plumbed in an old blood pressure squeeze bulb into the gun handle for bowel inflation. I don’t want to brag, but it worked as good as the surgical steel models I used while was going through my internship.

Too bad I threw it away when I retired…

Not a toy, a tool:

When my Father was growing up, his mother caught him taking enemas, and so she hid both enema nozzles, the one that fit the bulb and the one that fitr the bag.

He grew up in the 1970s when the Bic "Stick" type pen was readily available cheap.

Using the shell of a Bic pen, a Bic lighter, and a pocket knife he made his own enema nozzle. It may still be around somewhere

Seeing LisaK's comment about the BiC pen reminded me of the time as a teenager, I made my own enema bag. Growing up, the only enema syringe in the house was a red bulb syringe. As a teenager, very interested in enemas for pleasure, I read every home health and first aid book I could find. I learned that most enemas for older kids and adults were given by a bag, as were the two enemas I got from grandma when I was 10. I wanted an enema bag, but asking mom to get me one was not going to work since she knew that the enemas I gave myself were because I liked them, not because I needed them.

I decided to make my own. In the garage, I found some plastic sheets which I heat welded into a fountain syringe shape (as seen in the Sears catalog) with an electric soldering iron. Some rubber hose tipped with the barrel of a BiC pen as a rectal nozzle. It held a little less than 2 quarts. Initially I had to hold the bag up at arms length because it was not strong enough to hang on a nail but later I reinforced the tab so it would hold if I was careful. It took quite a few practice rounds before I was able to take the whole bag, but I sure enjoyed the process.

I used to make dildos out of certain curved tree limbs,grinding the ends to resemble penis heads and sanding and polyurathane varnishing to a high luster.The last one i made was from a plastic toilet brush, it has a 4 fluted handle like an enema nozzle,i cut the brush off and polished the handle to a high luster and it feels great going in and out!

I have been using a home made inflatable nozzle for years. It is made from ovc pipe and a bicycle inner tube. They always end up leaking air after a few months and have to be rebuilt but they work well. I have build pics in my profile