Self-made Suppositories

I think getting them out of the tubes is going to be the biggest issue. This is something I learned early on. Whenever I look for molds the first thing I think about is how easy it is going to be to remove the suppository. That's one reason I really like the water bottle ice cube trays. It's fairly easy to remove the suppositories from them. They also don't require any effort to stabilize them.

I agree that getting them out of there is my main concern. But the shape of the centrifuge tubes was just too perfect to pass up! I did look at the water-bottle ice cube trays, but the ones I found made "cubes" that were rounded on the bottom but flat on top, like a U -- not the ideal cylindrical shape. I'll just see if I can make these work. I didn't spend much on it ($2.50 for ten tubes) so if it doesn't work it's a cheap experiment.

I know exactly what you're talking about (and those aren't half bad either) but the one I have makes cylindrical ice cubes/suppositories. The really nice thing is that the bottom comes off making them easy to remove. Here's a pic of it:

http://www.awesomeicecubes.com/wp-content/uploads/2010/12/Water-Bottle-Ice-Cube-Tray.jpg

Here's another one I just came across that looks like it could have potential as well:

http://cdn.mommysavers.com/7/7e/600x464px-LL-7e6827f1_e7b4_ak_ice_cube_tray.jpeg

A cheap and easy way to stand your home made suppos upright while they're "setting" is to place the the molds they're in into a cup half full of sand, then into the freezer.

I've taken a Trojan (condom brand name) and filled it with equal parts of 72° Coconut Oil and solid Cocoa Butter (heat until liquid) poured both into the condom after mixing and hung it on the rack in my fridge until solid again. When it was hard I removed it from the condom and inserted way up my rectum and just enjoyed it while it was melting. Be sure to place a cotton ball on butt hole to prevent leakage.

Has anyone ever mixed tooth paste in suppositories?

In uk posh cooking shops and others a new thing for pealing garlic its a silicone tube about 3/4 dia about 6 inc long looks perfect looked at knew I need it for something could not remember what . Now I know xx

There are actually suppo molds that you can buy online. They come in different sizes and are pretty cheap.

I take a small amount of crushed ginger and add it to coconut oil or glycerin .You can also add a small amount of soap inside a homemade glycerin suppository 😃.

Ginger / soap suppository - I've tried that, it's good for adding a punitive edge to the treatment

I make my own glycerin suppositories by heating 31.6g glycerine and 5.3g glycerin soap in the microwave. Just for fun, add 0.7g of menthol for a cool feeling!

I didn't see where these have been posted before, but after many website searches only to find disappointment, I think I have found the mother lode for people who want an easy molding system for their homemade suppository creations. Sure, you can find the zzzz boring sized ones on ebay and what not or try to be happy with the little pop out ice cube tray ones, but if you are like me, the diameter and length of whatever you are wanting to home compound for your bum is where the true 'shock and ahh' comes in. So, without further ado, i submit these links for your consideration..... Let me know what ya'll think.

12" x 1" round mold - http://www.brambleberry.com/Mini-Round-Silicone-Column-Mold-P5810.aspx

9.75" x 2.75" round mold - http://www.brambleberry.com/Silicone-Column-Mold-P5619.aspx

3 5/8" x 7/8" round 4 at a time mold - http://www.brambleberry.com/4-in-1-Mini-Cylinder-Silicone-Mold-P6074.aspx

1.75" round ball, 9 at a time mold (for that extra little bit of pop on insertion) - http://www.brambleberry.com/Large-9-Ball-Silicone-Mold-P5533.aspx

That site (and no i have nothing to do with them, just happy to find it) also has essential oils like menthol, cinnamon, eucalyptus, etc, as well as really decent prices on coconut oil with a melt point around 75`F as well as all different types of glycerin items (liquid, plain white soap base, etc). I don't know how much coconut oil typically runs you folks, but around here, it's like $11 for like a pint jar of it. On the site, they have 7lb of it for $17. That's a win, and if you really just want to go all out making suppositories, they also sell it in 35lb and 418lb sizes (that's a 5 gallon tub or a metal oil drum!!).

I use a fine grater and Ginger root. Grate the ginger into a bowl. It will make a juicy pulpy ginger. Good fresh ginger from the grocery works well. Then I put the pulp and juice into a mold I made. It is from .5" irrigation tube. I fill the mold then freeze for about 2 hours. I mold 9" at a time and cut the finished product into 3 suppositories. The frozen ginger pulp slides in easy. Starts cold but then begins to burn after about 5 minutes. It will get hotter as time elapses. And about 30 minutes I empty my bowels into my diaper. I continue to have a hot bum until shower and clean up with soap and water. I also use one of these before receiving a spanking. It makes the spanking much better!

Sighs, need to get my workshops set up and crank out some molds...

I was sitting here thinking I wonder if you could use the plastic applicator from a tampon if you super glue the end closed as a mold and put them in the freezer? I was wondering how easy they would be to get out though. Would very much enjoy that size.

NEED MOLDS... I researched and developed a qualified formula for a very good suppository, but have not found a decent mold for that last part of the manufacturing process.

What started me on this path? I needed a suppository that worked like the ones Mom would hide, on occasion, up my bottom in my youth, long ago..

Part 2: Anal sensitivity. That started as a lad, 8 or 9 yo, when a mild, but exposing, medical procedure was done that involved exposing and touching my sensitive rear portal. I new that orifice was back there for more than one reason..

When I was a teenager and having some problems my mother made a suppository by cutting a block of soap up. I didn't see the shape or size and anyway it didn't work so I ended up being taken into hospital later that night.

Hermann, what is your recipe? I am curious

My mom made one out of a bar of soap several times. She would just use a knife so slice off a sliver of soap and lube it up for insertion.

When it comes to molds for making suppositories I use some large plastic syringes which we use at my workplace for dispensing glue, sealants and grease.

These have a nozzle at the top end which I guess is for fitting a needle, but they don't come with a needle of course.

The ones I use are BD Plastipak brand, total length is 5 inches and the inside diameter is 1 inch with a capacity of 60 mL.

With the plunger pulled all the way back the internal length is 4½ inches, so I can make suppositories which are 4½ x 1 inch.

I cut the top end off the syringe to open the end of it and then pull the plunger all the way back to make an excellent mold. I put in a little cooking oil and roll it around to cover all the inside surface. The allows the suppository to slide out easily and the plunger is used to push it out as you probably guessed.

I have a length of timber 2 inch x 12 inch with holes bored in it to allow the plunger to pass through and the syringes have "ears" at the plunger end which provide something for the syringes to stand upright. I can line up 6 syringes on this piece of timber which I just prop up on a brick at each end. I didn't bother making legs for it because I was in a rush to make suppositories! They are made using Copha (solidified coconut oil) which is melted, and then while it's still warm (i.e.- not yet beginning to solidify) I add honey – about 3 parts honey to 1 part Copha. They will solidify at room temperature, but cooling in the fridge will be faster and make them harder, and the honey is its own preservative so the suppositories will keep for quite some time. They are a useful treatment for hemorrhoids (anal or rectal), especially if you can get some medicinal (Manuka) honey which has the better antibacterial properties. But the benefit of honey is that it has a slight irritation effect in the rectum and, after holding it as long as I can, it causes a quite explosive discharge and a thorough purging of the bowels.

After insertion I push them as deep as possible using a dildo, which is really the plastic water tank from a squirt gun (water pistol), and its advantage as a dildo is that it is smooth polypropylene, 5 inch x 1½ inch with a rounded tip and shaped like a large penis. So it is very often used to give myself some anal pleasure if the real thing is not available, either by hand or fitted onto my f*cking machine. This device is mounted on a low table at bum height and I assume the doggy position and back up to it for a lengthy period of anal ramming. Before doing so I generally use one of my unmodified syringes to inject about a quarter cup of cooking oil into my rectum and this leaks out during the ramming process producing a rather messy (which is fun!) and very slippery form of lubrication. Sometimes I also use a cucumber by hand, and of course these can be selected at the grocery in any length and diameter desired!

After the suppository has done it's job then I have an enema to flush myself, and this is sometimes done using an empty sauce bottle filled with warm water (those plastic ones with the twist nozzle on it), or I use a length of plastic hose attached to the washbasin tap in the bathroom which has a length of plastic pipe (electrical conduit) at the delivery end. This is bent at 90 degrees and it has a rubber tip on it. So I can sit on the toilet, put it between my legs and insert the tip into my anus and enjoy a refreshing warm water enema. Generally this is done by relaxing my anus and allowing the water to freely flow out.

Afterwards, with empty bowels, I often have discharges of gas so I insert a 6 inch length of 1 inch diameter plastic hose which has a ball shaped collar on the end, formed from silicon sealant. This acts as an "exhaust pipe" and allows the fart to escape without effort, and it also serves to stretch my anus as a form of exercise to keep it a little less tight for those times when I am with a man and I can be f*cked with less discomfort. I may have this hose inserted for several hours, or even all night.

So... the syringes I use make a very good suppository mold, but if you want something simple and easy to obtain then have a look at this silicone cylinder ice cube tray: http://www.ebay.com.au/itm/311402269168?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I made smaller coconut oil suppositories using the fingers of a latex glove. I also made big ones by putting a condom in a toilet paper tube and filling it. After refrigerating, they are plenty solid enough to insert.

I agree @handEman, I use the fingers of a glove.. as I am in the medical industry no one at home thinks any different of gloves being around.... Or the coconut oil in the cupboard...

They stay nice and solid just long enough to insert and lube your anus as you slide them in....

All in the mood to make some more now

Jx

I am a user of Ivory Soap sticks. They word well and are fun to make and use.

I suppose that the best self-made suppositories are soap sticks made out of a bar of ivory soap.

I find the most convenient ad-hoc molds to be plastic toothbrush cases. The local dollar store has several sizes for $1 - some with toothbrushes, too! - as well as in round or rounded-square cross-sections (and sometimes in slightly exotic container shapes). They stand on their own in the fridge or are easily supported, and they usually pull apart at the middle, making removal easy. Get ones without a prominent ridge where the halves separate, or smooth the finished dealie with an emery board. (Depending on the case shape, you might have to round the business end, too.) Most have a small hole at each end, so you need to block the bottom hole (with tape, for example) till the fluid has solidified. If there is no bottom hole, make a small hole so it is easier to remove the dealie. You'll also need to make the top hole way bigger, and fill it through a small funnel. I have tried giving the insides a very light coat of oil and then pouring it out, leaving a film of lubrication for even easier removal. I've only used melted glycerin suppositories as the fill.

That said, I don't personally find the resulting super-poopers particularly pleasurable nor more effective as laxatives than bisacodyl. They are kind of impressive to play with, though. Glycerin is bacteriostatic, so you really only need to rinse them off after use, and keep them wrapped because they are quite hygroscopic.

Lastly, hi to everybody. I have not been abducted by aliens, but I am still too busy with both personal and work duties to spend any time back here yet. Occasionally I glance at the board, and if I have anything useful to add I will.

- jillie

Go to a horse supply shop, they use saddle soap to clean leather tack, cut a bit suppository shape and size.....or bigger, and insert..... then await the explosion.......works very well because of its high glycerin content !

I learn it from others using straws, fill the straw, insert and squeeze. You can also try silicone egg shape chocolate ice cube trays, it 's a cheap and perfect suppository molds alternative I think. the egg shape is perfect.

https://www.amazon.com/s?k=egg+shape+chocolate+ice+cube+trays&i=garden&ref=nb_sb_noss

https://www.cuou.net/ice-cube-trays.html

Several years ago I found and bought the suppository mold on the flea market. Then I tried to make gelatine glycerin suppositories and have to say that I succeed. It was not difficult and suppositories looked like from pharmacy. Also found very old recipe for laxative suppositories made from salt and honey. I have to say that I have never used lexative suppository with such strong and fast effect. Really big surprise.