Clogged nozzles

Sometimes a nozzle will get clogged with stool and the water will not flow, This is esp true when using a douche nozzle as the holes are small and clog very easy, But there are 2 ways to get the water going without taking the nozzle out to open the ports.

What you do is shut off the clamp and keep squezzing the part of the hose from the clamp to were the hose is attached to the nozzle you will fell it when its open it might take 5 or more squezzes but it does work.

Also a in line type of higgison pump will open the ports very quick if you have one.

Clogged nozzles usualy happen if you are really all blocked up in the rectum and getting the enema to relieve the problem.

Take the nozzle out and let the water flow entil clear. Than reinsert asart the enema again. It's nice tro get two inserts for one enema.

You can also just squeeze the bag. It doesn't take much pressure to unclog and it's quite a thrill. 😁

Do you suppose were all just a tad bit sick? If we are I know what the cure is. AN ENEMA BY A T.L.C. NURSE.

If I think I might have a problem with the nozzle clogging I'll insert it only a little bit, turn on the water and then push it in the rest of the way. The flowing water seems to keep it from getting clogged.

I recently had a higginson syringe clog, and I thought it was going to end up in the bin. I filled it up with soapy water, left it overnight, and by the morning it was clean as a whistle 😃

Just wash it and push the bag a little

Thats why I like to use the douche nozzle, it has back-up holes so you can get your enema without stopping and interupting the mood.

Dril a couple of 3/16in holes about 3/4in from the end of the nozzle.That should do it.

Using a proper enema nozzle, and hanging the bag high enough helps. I Find that soap will clump if you have hard water. In that case use distilled!

In an Epsom Salt and soapsuds, just allow the enema bag to set for 5 minutes or so lying on it's side, before you hang it, just to be sure all the Epsom Salt dissolves!

To unblock a nozzel. Take a firm hold of the tubing and squeeze firmly. A couple of firm squeeses should do it as it causes a force flow effect. This always worked for me.