My E-Stim setup

Hi Everyone,

I've been playing with e-stim for a while now.

I first started with a KWD-808 II I found at a yard sale. Since no one wanted it, I got it for $5. It has a variety of pulses available and you can mix different pulse type together, but it's not really very satisfying overall.

I bought a TwinStim+ a while ago hoping it'd be better, but it's less flexible than the KWD-808 by far. It's not bad as an adjunct device though.

A few years back I did some experimenting with making my own device after hearing about audio-based stim. I know that audio amplifiers are capable of producing fairly high voltages, but also have high current levels which can be pretty dangerous.

To mitigate that risk and to keep things lightweight and battery powered, I got a 200mW "Mini Amplifier/Speaker" from Radioshack (277-1008C) as my source of power and used two step-down transformers arranged in series and wired in reverse (turning them into step-up transformers). That raises the output level coming from the mini-amp and greatly lowers the current. I first started using a PC to make my own waveforms and did the playback that way as well. Recently, I began using an iPod to playback my mp3 files. With the mini-amp and the iPod set up about half-way, it more than fulfills my stim needs.

Congratulations on building your own e-stim box. I have built several of them based upon battery MP3 players. It is quite a rush, last Saturday's session is on my blog at this site.

If you would like to share some files, PM me or call 4048569287. You can also find hundreds of wave and MP3 files at smartstim dot com for free. Also a great site for homemade and commercial trodes.

Cheers

Skybear in N. Florida

I've been using conductive rubber tubes, 2" pads and some commercial butt plugs (I made one from a defunct C02 cartridge, but it was pretty awful). I've made a couple of urethral sounds from well polished brass rod, but I'd like to get (or make) a set of stainless steel sounds and a set of sounds with a couple of hot spots for use with e-stim.

Most of my audio files are ones I pulled from the internet years back. I've produced a few on my own in the past but have some new audio tools and will be trying to come up with something better.

One thing I forgot to mention was that my stim setup makes MORE than enough voltage. Be really careful with volume of the MP3 player and the mini-amp. The first time I accidentally jostled the volume knob on my iPod Nano, I nearly jumped out of my skin.

For urethral inserts try the conductive rubber as an insert works great but if you are going to hold it and push in & out, wear a rubber glove.

Check out some of the stainless penis inserts sold at places like the thechaingang.com. I really enjoy the graduation stretcher http://www.thechaingang.com/product/2178/450/graduation-stretcher

Neet little insert for everyone and it will stay in place without pain.

That's a good suggestion about the rubber glove. It's a little hard to manipulate the sound when the juice is flowing otherwise.

I have a couple of PAs (one large and one small) and I thought it'd be interesting to lock an insert in place with one of those.

I found some nice stainless steel rod stock on Amazon last night and I'll make a couple of sounds with that.

I'm still trying to engineer something that will let me place an electrode deeply. My best idea so far is to craft a threaded stainless steel rod with a nicely shaped electrode at the end and cover the steel rod with a rubber tube. Needless to say, I'll use some high-grade locktite on the electrode. It'd be rather embarassing to lose something like that deep inside. 😃

It would be preferable to have two independent electrodes that I can use, but I can't come up with a design I trust enough to use on my personal bits.

I have a tens. I use on pad on the base of the penis and a piece of 1/2 inch capped pipe with the other pad taped to it then insert it in my anus what a feeling

it is on pulse that gets stronger then lighter wow wow wow

If you go to tripod phaser, and purchase their software, hook your box to speaker output, then go to utube and play audio at the same time that you are running phaser 5, it feels almost too good, you don't want to quit.