Breast/Nipple Pumping devices

Keep an eye out for things at the local dime or thrift stores. I just made a set of breast pumps and pussy pumps from three jars I found for three dollars, a total investment of $6.00 and she's got her breasts being pumped.

Could you please give some specifics about your project?

What did you need other than the jars (and what size are they) and what tools and method did you use to fashion them into what you needed?

Thanks

I used vacuum valves from Mcar Master. Drilled the correct size hole thru the plastic jars (flour/suger jar) 3" x8", and confirmed they held a vac. I didn't even need to use glue. I'll try to post some pics..

McMaster-Carr ?

http://www.mcmaster.com/#

😎,Great idea from curious 78. I found an acrylic vase at the thrift store, drilled a hole,added a barbed adapter,tubing and a hand transfer pump.Lots of good times for under $10! Use it or loose it! 😁

Bicycle pumps are good if you can find the right one that you can turn the valve round. The old ones had a greased leather valve that you could just unscrew. Greased leather, that's enough for me 😄

One could also use the pumps sold to inflate air mattresses. It even comes with different sized tips.

http://www.walmart.com/ip/33563196?wmlspartner=wlpa&adid=22222222227023060455&wl0=&wl1=g&wl2=t&wl3=40972123592&wl4=pla-78914767832&wl5=9008449&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=33563196&wl13=&veh=sem

Would an outboard motor fuel priming bulb work well?? They are great as a pump going the other way for enemas!!

I've made a nipple suction device out of plastic syringes and aquarium air hoses and valves. I had several syringes about half an inch in diameter, and another one about an inch. I took the plungers out of the smaller ones and attached thin plastic hose from an aquarium supply place to the ends of the barrels.

Then I used plastic air valves, also from the aquarium supply, attached more plastic tubing to the other sides of the valves, going to a T shaped connector (again, aquarium supply) and a bit more tubing to connect to the barrel of the large syringe. To use it, I close one of the valves, moisten the attached open ended syringe, place that open end over one nipple, draw out the plunger on the large syringe a couple of times, drawing my nipple into the barrel of the smaller syringe, then close the air valve which keeps the vacuum strong.

Then I open the other air valve and repeat the process on my other nipple. In the end my nipples are stretched well into the tubes and can stay like that for quite a while. It turns them deep red to purple in color, they stay elongated for a while even after the tubes are removed, it makes them very sensitive and it has also had some lasting effect making my nipples permanently longer, which I like very much.