Inexpensive improvement to standard rectal pipe

While many of us boast of having an extensive array of enema tubes and bags, someof our new members who are just starting out may be both cash constrained and little shy of purchasing equipment from web based suppliers.

While some will fabricate there own appliances from plastic painter's buckets and Vinyl tubing from hardware stores one can easily modify an inexpensive, five dollar combination hot water bottle /enema bag from WalMart.

First take a small twist drill bit and carefully enlarge the opening in the fitting that attaches to the bag slightly. Next, attach a five foot length of 3/8" latex tubing to the screw in fitting, using a plastic wire tire to insure that it stays in place. finally, taking a second small twist drill bit open up the holes in the douche nozzle to facilitate the faster flow. The result will be quite satisfactory and make for a very nice "first" enema bag.

Should you wish for a longer, curved, free flowing nozzle, simply cut a section of gray, plastic, water supply pipe from the plumbing department at Home Depot, and round the end with a piece of wet / dry sandpaper while running the pipe under a running faucet. Heat the finished enema pipe in boiling water until it is soft enough to bend to whatever shape you desire. You will find that your new 1/4" plastic enema pipe will slide perfectly inside the 3/8" Latex tubing where it can be safely secured with another plastic wire tie.