Nozzle Talk-What is your favorite enema nozzle.

I recently purchased a one inch Silver Bullet Enema Nozzle from the Collector. It’s made from a solid piece of aluminum and is brightly polished. It has a four hole side spray pattern near the tip which provides a nice spray. I am extremely impressed with the quality of the nozzle and the workmanship that was used to make it, it will last forever. When I used the nozzle the water temperature in the bag is approximately105 F, it’s the usual temperature I use. The nozzle was at room temperature and it felt like many other nozzles that I have used. It does have a cold feel to it when it’s first inserted. When the 105 degree water starts to flow I can feel the nozzle slowly warming up and when approximately the first quarter of the bag flowed through the nozzle it warmed up to the 105 deg. temperature, it felt like a soothing massage heater was in my butt. This nozzle holds the radiant heat from the warm water and with the warm water filling me up this nozzle felt fantastic!!

The heat from nozzle relaxed my anal muscles, it seems to relax my entire colon and makes it much easier to take the entire bag. It enhances the entire enema experience. It also reduced inflammation from annoying hemorrhoid’s. Every time I use it it seems like the entire enema session gets better. The Silver Bullet is one of my favorite nozzles. My only regret is that I didn’t buy one a long time ago.

I suppose it's inappropriate to ask to borrow it? (Just kidding.)

It sounds quite nice. Glad you enjoyed the experience.

For a three enema series:

1. Klystra double inflatable barium style nozzle with 500cc/250cc balloons for enema number one.

2. Silicon nozzles phallic nozzle with retention ball for number 2.

3. Silicone Nozzles extra long colon tube with retention ball from number 3.

My favorite is an inexpensive inflatable one I got from amazon. Its basic shape is a smaller butt plug. It is surprisingly comfortable and easy to use. It really does seal me well and I can move around or walk while holding.

Yes, you cannot beat the double balloon nozzle. My favorite of all time, so far.

Can’t beat the inflatable balloon nozzle. I’ve got a 750/250 double balloon and the first time I inflated it against my prostate, so much came out of my dick I thought I was going to blow my load!

Balloon nozzle is fantastic, especially for a large volume enema. Love feeling full and knowing there won't be any leaks.

SN OF-13-FLY. https://siliconenozzles.com/collections/specialty-enema-nozzles-3/products/of-13?_pos=2&_fid=9a8629977&_ss=c

I've used a Collector Silver Bullet for years. Love it!

SN OF-13-FLY. https://siliconenozzles.com/collections/specialty-enema-nozzles-3/products/of-13?_pos=2&_fid=9a8629977&_ss=c

@Thursdays_child: When it’s time to bring out the big guns!

@Iris1858 The OF-13-FLY is very soft and goes easily around the curve into my sigmoid. There were some scary posts on this board about colon nozzles, so I showed it to my friend Twinkling Granny Sue. She said "its soft, it's large, you will be fine". I tend to use it when I take a herbal tincture enema and that definitely means keeping the toilet to hand for the next few hours.

I got an 8 inch black silicone bumpy enema nozzle probe off of Amazon. I usually only work 3 or 4 of the bumps into my lubed anus. It gives a great enema even not inserted the full way.

Double inflatable nozzle. No contest. Though it is ashamed no one makes a decent one. They are either too small, or have those silly groves in them that make it to where it leaks unless you over-inflate it. I made my own with easily obtainable materials and some simple ingenuity, and I have to say, it works better than any I have ever bought! There is just nothing like the feel, and seal, of a good double inflatable nozzle!

I have wanted a genuine silver bullet nozzle for a very long time, but the price is just too much for my finances. I do have two stainless plug shaped nozzles that also feel cold going in and then warm very quickly to the temperature of the water. One is 1.25" and the other is 1.5" at the widest point. I love using them. My current favorite is a silicone nozzle with a 3/4" ball at the tip and a 1.25" ball farther down. I like that it feels fantastic sliding in, and has a perfect shape to assist with retaining. It feels wonderful to squeeze down on when cramping. I only wish the balls were slightly larger. A 1" first ball and a 1.5" second ball would be perfect for me.

My favorite nozzle is a silicon nozzles model B. It is 12 " long and 2" at its widest. It fits nice and deep and fill my easily without the urge to expel right away as it bypasses the rectum. Very enjoyable ❤️

@itsameah How exactly do you construct your DIN? I have made singles but haven't figured out the double. Can you post some pics?

Simple but effective for all the right reasons... the curved douche nozzle

I have 2 favorites. A nice long douche nozzle because of the spray inside, and my 2+ inch butt plug one.

@itsameah How exactly do you construct your DIN? I have made singles but haven't figured out the double. Can you post some pics?

@caffeine The trick is to use some sort of round hard fixed surface(think, something similar in size and shape as the inflated balloon would be)as the outside balloon. I used the dipping end of a dipping ladel and smoothed it to be round. It doesn't need to inflate. If you create the right distance between that surface and the inside balloon, it pulls it in tight and makes a good seal when you inflate the inner balloon. The nozzle itself is one of those plastic tubes that would be blown up to become a two-liter bottle. It kind of looks like a test tube. This hollow tube allows you to install multiple tubes to carry liquid for the enema and air to inflate the inner balloon. For the inner balloon I doubled up some plain ole latex balloons and sealed them down and wrapped string to secure them. I will try to get a picture up. But it is a prototype (very crude looking) I made to test, and its worked so well I never made a better looking one, but I plan to do that.

For me its either the Delrin nozzle, double balloon or the pezzer nozzle. Depends on my mood.

I like the bulbous hard plastic 'barium' style nozzle. I would like one in the same basic shape - but with a bit more diameter. I also like a nice colon tube that I can slide in 18" or so for a nice warm filling:-)!

Que Sera, Sera...

Something a bit thick with a narrow end by the flange that won’t slip in and you can grip. Not a size questions,to each their own. The silver bullet looks nice for heat cool transmission. Never tried it though.

I began my solo enema adventure after finding a douch bulb in the bathroom closet at age 11. That was a game changer the first time I had an orgasm with that thick nozzle pushed as deep as it would go. Now I use a 20” 1/2 inch diameter colon tube that reaches very nicely just past my sigmoid flxure that decreases the pressure in my rectum allowing for a very nice fill. I love a fast fill and the colon tube makes that very nice…

I’ve toyed with the thought of a nice silicone nozzle colon tube that has more girth and much more length. I may get one someday!

A home made one, about 4" long and 3/4" at widest point. I think it was a handle for something and drilled out lengthwise and having a hose attachment glued in, has provided a lot of satisfaction.

For five years now, the most versatile and pleasant nozzle for the first enema has been 6” Oval Flange-Style 1.9” OF2. For the second enema, depending on my mood, I can use the same one, but if I want to enjoy a long enema without any worries, then I use 13.5” Oval Flange-Style 2.5” diameter colon enema nozzle.

One size definitely *doesn't* fit all. Plenum now exclusively uses a 3" retention plug from Silicone Nozzles. Occasionally I have to deal with feces clogging the tip on first inserting it. Before that I gripped a straight tube with my anus. (Might be fun to try that again sometime.... have times changed???)

For me, no matter what size the nozzle is, there's a possibility of leakage around it, if my ass muscles slacken. It's an interesting art, I find, of letting my abdomen open and relax to receive, while my anal muscles patiently man the dikes :-) :-)

I have a stainless steel enema nozzle, about 35mm in diameter and very heavy. It feels cool during insertion, sits quite heavily in the rectum after insertion, and as soon as the enema is started, it warms up within seconds to the temperature of the flowing fluid – a totally arousing sensation.

https://en.zity.biz/gallery/image/160889