Reciprocating Actuator Fuck Machine

Hi everyone, well i finally bit the bullet and bought myself one of those Reciprocating Actuator devices that some people use with Dildos as a fucking machine.

I bought it from AliExpress for $90 AUD and after i got it, i realized that i needed to buy a Remote Control setup for it so that when i eventually mount this device inside a box we can operate it remotely when the power cable has been plugged into it.

https://www.aliexpress.com/item/1005001724799252.html?spm=a2g0o.order_detail.0.0.2e23f19c8bZi5L

I found the Remote Control device in Ebay for $48 AUD and i have now set the Actuator up ready to make some kind of enclosure to mount it in so that my partner can use it with her Suction cup or Vac-U-Loc TPE Dildos.

https://www.ebay.com.au/itm/394035559649?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

This Device is a 240v to 24v model, with a stroke length of 30 to 150mm (can be adjusted) and it operates at approx 100rpm.

You can see the video demonstration in the following link.

https://mega.nz/file/NMJRwRLS#vTsnS1aa0lRQjJKoq8N--lDwFR0ECPhUT1QOsC6tmKs

As yet i am still not sure what type of housing i will make to mount this device in, originally i was going to bolt it to a pushbike or exercise bike frame and have a hole in the seat so that my partner can sit on the bike and have the Dildo thrusting her pussy while peddling.

Be warned, this device is noisy, so whatever enclosure i mount it in will have to be very well padded and insulated, while also still allowing the Remote Control to maintain a good signal to the device.

Any ideas would be appreciated.

Thats a cheap wiper motor or similar if good gears it would be much quieter

Thats a cheap wiper motor or similar if good gears it would be much quieter

I don't care what the motor is by design, this was the only Reciprocating Actuator that i could find to try this experiment out, there are a few that are very similar but they are noisy as well, and i did this just to see how it would turn out, never mind the comments about how good or bad the “gears” are.

Anyway, it is what it is mate, at the end of the day the device will be housed inside something like a box, so i will just dampen it out with lots of padding or insulation.

Thats a cheap wiper motor or similar if good gears it would be much quieter

Simple remark it’s noisy. . Why so defensive? Maybe your other post will not get any questions

I don't care what the motor is by design, this was the only Reciprocating Actuator that i could find to try this experiment out, there are a few that are very similar but they are noisy as well, and i did this just to see how it would turn out, never mind the comments about how good or bad the “gears” are.

Anyway, it is what it is mate, at the end of the day the device will be housed inside something like a box, so i will just dampen it out with lots of padding or insulation.