Max pump count for rusch dbc with single inflator

In my experience, rusch single balloon holds at least 8 full pumps of air.

Saying full i mean that i close inlet valve with a finger while squeezing bulb.

So there is no air leakage from it.

A double balloon one i usually inflate up to 8-10 pumps.

Being outside of the body a most part of air is in inner balloon.

But in some images i've seen that outer balloon is inflated to impressive size.

Yet it hard to guess a count of applied pumps.

How many pumps are maximum (balloon does not burst) for this nozzle inside the body?

How many you tried?

Thanks!

How many pumps are maximum (balloon does not burst) for this nozzle inside the body?

The only way to find that out is to pump one up inside of you until it bursts. Count the number of pumps it took and subtract 1. Then go see your doctor to ensure there is no internal damage.

But, I don't think you want to try this. I'd suggest pumping it up til you feel a comfortable full feeling, then stop!!!!

How many licks to the center of a tootsie pop?

The ‘official’ (or nominal, if you like) capacity of the balloon is 300 cc.

You can easily calibrate your inflator pump as follows /this is how I did it/:

– Take a measuring jar, preferably a larger one, say 1 litre/quart

– Fill it to 400 or 500 cc with water

– Connect the inflator bulb to the device with valve open

– Squeeze the balloon completely with one hand and hold it while you close the valve on the inflator

– Immerse the flat balloon to the water compeletely

– Open the valve and start to inflate, counting the pump strokes

– Monitor the volume level in the jar

Obviously you can perform this without getting the balloon flat; I insert it flat and so had to get the count from that state.

For me it took 10 or 11 strokes to get to 300 cc; to be honest I feel it a bit too big in my rectum, so I usually do 8 only.

My old style DBRN would take four good squeezes per balloon. I was always temped to do more for some reason, but it shortens it's life.