Has anyone ever modified their Dildo's?

I went from using a 2 1/2" diameter Dildo to a 3" diameter Dildo about 1 1/2 years ago. I got to where I went for the 3 incher every time and the 2 1/2" sat in the drawer. I was interested in desensitizing myself a little bit deeper. I looked at various porn stores, and even looked online. I couldn't find the toy I was thinking of. I wanted a 10" deep Dildo that could squirt. Not only that, I wanted one that could also squirt Anal Ease. So I took the 2 1/2" Dildo to the garage and put it on the work bench. I went upstairs and grabbed a bit of that thin tubing from a fish aquarium set-up that failed. I went back to the garage. I looked and found a piece of 3/8" soft copper tubing about 15" long. I used my Cutting Torch to heat the piece of copper tubing. I shoved it into the center area of the Dildo, on the top side, just above the nut sack. I had to heat it up a few times to get it all the way to the head of the Dildo. I pulled it back out, cleaned it, heated it, and shoved it back through, all the way. I let it cool down. I shoved the piece of the plastic tubing through the copper tubing, with extra hanging out. I removed the copper tubing, and left the plastic tubing in the Dildo. I cut the tubing off, just inside the head of the Dildo. I left about 24" or so hanging out the back part. I brought a tube of anal ease to the work bench. I removed the cap and drilled a hole in it slightly smaller than the plastic tubing. I forced the tubing into the cap. I screwed the cap back on to the tube of anal ease. After getting both of my Dildo's set up in my private outside area, I gave myself an enema. After a few minutes on the toilet, I opened a new tube of anal ease. I inserted it into my hole, and used my butt cheeks to empty it in to what I call my canal, just inside the butt hole. After about 5 minutes, I went out to the back yard with my camera on a tripod to get some good pictures. I mounted the 2 1/2" Dildo and squeezed on the tube until it was empty. I worked the 2 1/2 incher for a few minutes. I changed to the 3 incher and worked it for about an hour, hopping off and on, and taking pictures. I love looking at pictures of me having this huge Dildo being shoved up my ass. The modified Dildo worked well. After I was done abusing myself, I cleaned up my toys and put them away.

The next time I got the 2 1/2 incher out, I noticed that it had a bit of an off smell to it. I didn't realize that there was a bit of excrement in the end of it. It is definitely not a good idea to have a toy that is not THOROUGHLY cleaned, to be put inside me. From now on, I make sure that the tube is well cleaned before using the modified Dildo. It's a nice tool though. I still don't use it that much, since I fell in love with my 3" diameter Dildo. After I get done with Mr. Huge, and get him cleaned up, I give him a kiss on his head, tell him I love him, and put him away until next time.

Oh. back to the modified Dildo. I still use it on occasion. I keep in mind that there's a bend in the road, about 9" inward though. So even though I have the modified toy, it concerns me to use a desensitizing lube that far inward, because I'm afraid of hurting myself and not being able to tell of it until the stuff wears off. Although it's a good idea, and although the toy works as I desired, I'm still not totally sold on it. Thanks for reading my post on my modified Dildo fabrication and experience.

My wife asked me to trim the balls off of her large big blue dildo once. She said she didn't have need of the balls and wanted to get more of it into her.

If you check out my gallery, you will find a nice black curved dildoe I drilled out and added a fitting.

Only challenge was drilling a straight hole in a curved object. I used a jig to straighten it and then drilled.

Flexible materials are a problem , since they close up, after drilling a hole, so added a drinking straw to keep open, yet bend slightly as needed.

I recently removed the ball sacks from 5 favorite dildos to add an additional 1 1/2 to 2" of extra shaft length as well as flairing the bottom to be wider by an additional 1"---all and all a fine mod-

I have an old wooden golf umbrella handle that has 5 pronounced ridges. Years ago I sanded it down to very smooth and applied a couple coats of polyurethane to seal the wood and give it a nice smooth slippery surface.

A few times I needed the wife to up and get it out of me. Felt great in that deep though!

Solution: it already had a hole in one end of if, so I whittled, filed and sanded that end to a taper. I drilled to the right size to very securely attach a length of hose for a total 16" device.

I rounded the end of the hose smooth so I can use it either direction. I fuck myself crazy with this thing. I'll pump it at different depth locations inside me and traversing the bend area.

Those ridges get the juice fountain flowing and I need to take breaks from all the orgams.

Everybody should have something like this. It's amazing!!!

Once I bought a dildo that was veiny but not enough to give me the pleasure I wanted. Instead of slippery lube, I used honey to make it sticky and gently adhere and pull my rectal walls each time it went in or out. After playing a few times and with increased friction, honey got too thin and the fun ended. So I wrapped a few rubber bands around it tightly and ... what a feeling! I got the most veiny dildo that not only was different every time I used it, it also allowed me to change the thickness of the shaft at any point (or points) along its length...I still use this trick when I outgrow my dildos and I can easily double their girth, let alone the great ribbed texture and pull thanks to the rubber that makes me melt every time I use them.