Testicle Pillory

I saw a wooden testicle pillory used in many videos such as this one.

https://www.pornhub.com/view_video.php?viewkey=ph58de888b6107c

It is made of a base, with two 2x4's vertical. Two cross bars at crotch level with appropriate cut outs clamp the testicles so they are protruding on the other side of the bars from the sub's body. At the top of the 2 x 4's are eye bolts to which wrist restraints are attached with carabiners. The slave is thus restrained by his balls and wrists.

I found a small wood pallet, just big enough for the feet an ankles through a hole in the slats. I put a 3/8" plywood board on one side. I and cut 2 four foot 2 x 4's and drilled holes for bolts to attach them to the pallet and for the cross bar. I used 1/2" thick x 2 1/2" wood for a cross bar. I cut a slot for the neck of the scrotum. I used a 1/2" square rod for a top clamp to go over the scrotum. I drilled holes in the clamping bar and the cross bar, for long #8 screws and wing nuts. I could loosely attach one side of the clamping bar, pull my testicles into the slot and put the clamping bar in over the scrotum and thread and tighten the other screw.

My balls are now securely clamped in place, like a humbler. Only the bar is bolted to the 2 x 4's When I attach my leather wrist restraints to the eye bolts at the top of the frame, I'm helpless! For more fun I chain my leather ankle restraints to the bottom of the 2 x 4's. If I attach a chain from the bottom of the 2 x 4 to the eye bolt on top, I can bend over the cross bar, and secure my wrists to the chain with carabiners assuming a bent over posture for a butt whipping.

Photo of my copy of the device https://www.zity.biz/index.php?mx=gallery;ox=showalbum;ax=8406

That actually looks dangerous if the submissive should step or slip off the platform.

Also, if the sub flinches severely and lean hard forward or backward, would the 2 x 4s NOT break due to the strain developed where it is bolted to the pallet?

@susie I'm flattered you'd pay attention to my pic and post!

I copied the idea from a design on Clubdom, an S & M site. Several videos show severe whippings with struggling, without damage to the pillory. They attached the 2 x 4 to 2x6 boards with 4 bolts as I have. The joint is very secure, and no slave will break a 2 x 4. . After reading the post I jumped on the joint without damage. The weak part is the cross bar, made of 1/2" wood. Remember this model is just for me. Another slave throwing himself forward could easily break the bar I would recommend for extra strength, a 2 x 4 cross bar; the area near the balls could be cut out some

To keep the slave (me) from moving the feet I use leather ankle restraints chained to the posts. The more bondage, the better. I thought about pillory style wood covers, but that's more work.

The main purpose of this furniture is testicle restraint. Even the light cross bar I use is strong enough to immobilize the testicles for cock and ball punishment, & keep the hands restrained.

I have to disagree with you, that a 2x4 cannot be broken in this scenario. I believe enough sideways force by either a heavy sub or a combination of the dom & sub (e.g., dom loses balance and falls on sub) could easily break one.

Ensure the base is stable enough that it will not fall/tip in any direction, either. As depicted, the rig MAY be adequate IF the sub is standing on the base of the pallet, within the confines of the "box".

@intruder: Stability and strength are important considerations. My copy is suitable for my 5' 7" 155 pound body, used for self spanking. I have posted 2 more images, including the original, with a stronger base and crossbars. Another reader making his/her own for a 300 pound bodybuilder would need engineering design help.

My copy is suitable for my 5' 7" 155 pound body, used for self spanking.

That is probably true because you are unlikely to spank or whip your balls as hard as someone else might, hence you are less likely to fall over or break the support posts (where the bolts run through and could split the wood).

@ susie: The pillory immobilizes the testicles, so the slave is unable to pull back more than 4" the limit of his attachment to the balls, so he isn't going to pull back or move from side to side without castrating himself. In practice I've' watched nasty whippings on penis and testicles, with bruises and bleeding. The slave doesn't move his body enough to stress the frame.

I added more bondage: I put on ankle cuffs and chain them to the uprights, and wrap a belt around the thigh just above the knee and buckle it to the upright. Now I have two more bondage points on my legs, one on each wrists, the testicles. I often tie a noose around the head of my penis and attach it to different places like the leather neck collar.

To self spank, I fasten one wrist to the top of the post with two dee rings to ibve men more slack. I can hold a whip paddle or spanker and hit either my butt, penis or testicles. The sensation of struggling against the leather straps after the pain of being struck is pleasurable!

I put my laptop in front of me, and play penis and testicle whipping videos, and match the hits on the video with self spanking on my own penis and testicles, although I confess, not as hard.

Interesting pillory with real possibilities. I, personally, feel that round rods for the testicle clamps would offer additional features, and perhaps a cutout in the center so the subject could not move laterally. That disciplinarian certainly needs to be complimented on her aim... a very professional job.